Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TechnoVE PRO
- Page 1 User Guide TechnoVE PRO 240V charging station for electric vehicles...
-
Page 2: Table Of Contents
Modification’s list ..........................3 Concept ............................4 Prerequisites............................ 5 Objective ............................5 Update list ............................5 1.5 PRO ............................ 5 Starting guide ..........................5 For users ..........................5 For owners ..........................5 7.2.1 Initial configuration of a group of charging stations ............5 7.2.2... - Page 3 The « technove_stations » wifi is present, but it is impossible to connect to it....... 13 The connection shows red and sometimes yellow, so your network signal is not strong enough at the terminal........................... 13 User Guide TechnoVE Pro...
-
Page 4: Modification's List
2 Modification’s list Date Author Description #Revision 15 december 2021 J. Dalpé Initial version 1.5 PRO User Guide TechnoVE Pro... -
Page 5: Concept
3 Concept The concept of TechnoVE Pro is to facilitate the management of several stations. The idea is to be able to bring together several kiosks in groups so that they share information. As can be seen above, here we have 8 charging stations which are in 2 groups (Building Group A and Building Group B). -
Page 6: Prerequisites
In order to have a stable experience, the Wi-Fi coverage must be strong enough where the charging stations are located. 5 Objective This guide provides all the information for the use and configuration of TechnoVE Pro charging stations. Update list 6.1 1.5 PRO Initial release of TechnoVE Pro version. -
Page 7: Network Or Stand-Alone Mode
Once your network connection with the charging station is established, your device will automatically connect to the station when you approach it. The application is functional as soon as the connection is established. User Guide TechnoVE Pro... -
Page 8: Features
In addition, if the charging station is in load sharing, it is not possible to modify this value. 8.2.2 Wifi Display of the configured network name. You can configure the Wifi network by selecting this value. User Guide TechnoVE Pro... -
Page 9: Update
8.3 Horizontal swipe If you have more than one terminal, you can access it from the main page, by swiping from left to right or vice versa. You can also make this selection from the "bornes" section User Guide TechnoVE Pro... -
Page 10: Charging Mode
4. Press on « exporter » 8.6 Dynamic power sharing Dynamic power sharing allows you to control the maximum power of a set of TechnoVE charging stations. Example: You have two charging stations installed and you do not want to overload your electrical installation at all times or during winter. -
Page 11: Configure The Power Sharing
When the stations are in a group, they share information on users, charging mode and charging times. The stations are synchronized between them using the most recent modifications. You can see the sync status from the group page. User Guide TechnoVE Pro... - Page 12 3. Press on “multi-utilisateurs” 8.9.2 For a group of charging stations 1. From the main page, choose a station from the group 2. Press on the button “groupes” 3. Press on the group 4. Press on « multi-utilisateurs » User Guide TechnoVE Pro...
- Page 13 2. Press on the button « supprimer » 9 Troubleshooting and error messages 9.1 Automatic configuration doesn’t work If the app is not able to detect the charging stations • Approach the charging station and resume the process User Guide TechnoVE Pro...
- Page 14 • Close the breaker of the station to reset it. • Try again. If it doesnt work, call the TechnoVE support. 9.3 The connection shows red and sometimes yellow, so your network signal is not strong enough at the terminal This sometimes happens when the terminal is outside.
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers