Summary of Contents for Modtec Integ ChargeUp
- Page 1 USB-A port USB-C port AC outlet Clamp screws Pole clamp Power button Power indicator...
- Page 2 Product Introduction The Integ ChargeUp is a multipurpose charging unit and power extension that brings the sockets within arms reach. The unit can either be placed on a desk where it will sit firmly with its stiff rubber feet or it can be placed on a pole with the built in clamp to free up some precious desk space.
- Page 3 Product Features USB-A Fast charge USB socket that provides up to 2.4A at 5V (12W). The USB-A fitting takes the majority of current USB devices. USB-C Fast charge USB socket that provides up to 3A at 5V (15W). The USB-C fitting future proofs this unit as well as providing more power to existing devices that support it.
- Page 4 Package contents ChargeUp Pole clamp 2 x Cap screws 4mm Allen key Note: Where assembling to a pole, ChargeUp can be placed at any height...
- Page 5 Assembling to a pole...
- Page 6 1.8m power lead USB-A and USB-C socket plugs into standard for charging only 3 pin NZ/AUS socket Push button Blue indicator switch to turn light shows when unit on/off the unit is on Usage Notes • The total power of the connected electrical equipment must not exceed the rated power of this product.
- Page 7 Should the Modtec investigation reveal a warranty issue, Modtec agrees to repair, replace or upgrade the product. Should the Modtec investigation reveal the issue is not a warranty issue, Modtec will report its findings and recommendations to the purchaser without charge.
- Page 8 ChargeUp Modtec Industries Ltd Phone: PO Box 14, Silverdale , (+64) 9 426 6380 Auckland 0932 Email: New Zealand order@integinternational.com...
Need help?
Do you have a question about the Integ ChargeUp and is the answer not in the manual?
Questions and answers