Optional) Connect The Ac Max App; Start Charging; Stop Charging; Led Indicator - Delta AC MAX Installation And Operation Manual

completed, the indicator illuminates in blue and the EVSE is ready to charge.
3.1

(Optional) Connect the AC MAX App

1. Search on the Apple App Store or Google Play for Delta AC MAX App and install the app on your
smartphone.
2. Open the app and follow the instructions on the connect screen.
Note: If there is no QR code on the back of your quick installation guide, your AC MAX was
produced before the compatibility with the AC MAX App. In this case, open the firmware update
manual in the AC MAX App and follow the instructions to upgrade your wallbox.
3. The required password to enter the advanced settings is 0000.
3.2

Start charging

1. Connect the vehicle connector to vehicle inlet.
Note: for socket or socket with shutter model, please connect the plug to EVSE first.
2. Authorize the charging session either be setting the key switch to ON or via the AC MAX App, dependent
on the DIP switch number 2 (2.2.4.2
3. The indicator flashes blue to indicate the charging is initiated.
3.3

Stop charging

1. Stop charging session at the vehicle.
2. Disconnect the vehicle connector from the vehicle inlet.
Note: the plug would be locked by the EV and please unlock the plug if needed.
3. Recover the vehicle connector to vehicle connector inlet.
4

LED Indicator

Status
Black
Yellow, fast flashing
Blue
Blue / Yellow (alternating)
Authorization mode
Description
Power off.
Initial configuration and self-test.
Standby mode (not connecting to EV).
Charging with limited charging power (limitation via external power
control)
22
) configuration.
v1.0.3