Page 1
Scope of Supply/Bill of Material & Mounting Drawings Part Number: Y-T700-20-01-SL / Y-T700-20-02 Part Description: FRAME PROTECTORS – YAMAHA Tenere700 Copyright By SRC Design and Specification are subjected to change Page 1...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Mounting Instructions SRC Frame Protector uses the mounting hole located (as shown in the drawing). The Protector shields the frames (Left side) Step 1: Before starting to mount, we have Remove the Original Screw in Motobike (as shown in the drawing).
Page 4
Step 3: Ensure visually the Protector shields the Frame, as shown and tie-up the cable to the frame at the top and tighten the bolt. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.