Advertisement
How to use HK Series IPC connected U series NVR（NVR3108-NVR3216)
1. Power on the camera and connect it to the same router as the computer with a network cable
(instead of connecting the camera directly to the POE port of the NVR).
2. Install the SADP tool software, then Activate the camera.
ANPVIZ Official Website(https://www.anpvizsecurity.com)-Download-Software&Tools-HK Series
SADP tool download
link：https://www.anpvizsecurity.com/download-21725
Note：If the camera is not activated and connected to the NVR POE interface, the NVR will randomly
activate the camera, and the camera password will not be obtained. Please unplug the camera, power
the camera separately, search the camera IP through the SADP tool, click Forgot Password, export the
XML file and send it to support@anpvizsecurity.com to get the reset key.
After the password reset is successful, please enable the DHCP function of the camera first, then
search for the camera IP, log in through the browser and enter the camera menu to restore the
camera to factory settings. After the camera is restored to the factory successfully, activate the
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ANPVIZ NVR3108
- Page 1 How to use HK Series IPC connected U series NVR（NVR3108-NVR3216) 1. Power on the camera and connect it to the same router as the computer with a network cable (instead of connecting the camera directly to the POE port of the NVR).
- Page 2 camera again through the SADP tool. After activating the camera, connect it to the NVR POE port. Or you can reset the camera through the hard reset button of the camera, as shown in the figure Remove the dome cover of the camera and find the reset button. After the camera is powered on and started, press and hold it for about 10 seconds to reset the camera.After the camera is reset, just activate it again through the SADP tool.
- Page 3 channel, select the camera input The password of the camera can be connected normally, as shown in the figure...
Need help?
Do you have a question about the NVR3108 and is the answer not in the manual?
Questions and answers