Technical Specification - Aigo A208 User Manual

aigo A208 Digital Audio Player
5. Right-mouse click on the folder, and select the "Rename" option.
The menu will disappear. The folder will be highlighted in the right-hand pane, and the
folder name will be highlighted inside of an editing box.
6. Type in the new name for the folder, and press the Return (8 ) key on the keyboard.
The new name will appear next to the folder and will be changed on the Player.
7. When you have finished and want to disconnect the Player from your PC, single-click on the
"Safely Remove Hardware" icon in the System Tray at the right-hand end of the Windows
Taskbar (located at the bottom of the screen), and then single-click on "Safely Remove USB
Mass Storage Device – Drive (E:).
After a few seconds, a text bubble will appear tell you that it is safe to remove the connection
between the Player and the PC.

Technical Specification

Dimensions
Weight
Internal Flash memory
size
Processor
LCD Screen Size
Battery (1 x AAA)
Acceptable Music
formats
Record
MP3, WMA
30mm x 95mm x 18mm (H x W x D)
40 grams (including battery, excluding earphones & strap)
128MB, 256 MB, 512 MB or 1 GB (depending on model purchased),
with 10 MB reserved for Firmware and system management)
75 MIPS DSP
128 x 32 pixel (Dot-matrix LCD with backlight & ID3 Tag display)
Max Play time = approx. 8 hours
MP3, WMA
Sample rate:
Recording formats:
Max. Recording Time:
Max. Headphone output: 7 mW (each output)
Total Harmonic
Distortion Output:
Frequency Response: 20 Hz ~ 20 kHz
Sound-to-Noise Ratio: > 80 dB (decibels)
Page 33
USER MANUAL
8 KHz to 32 KHz
WAV (with ADPCM encoding)
Each 128 MB memory provides about
8 hours recording (at default setting,
8 KHz)
0.01% ~ 0.5%