Call Back - Nokia 9290 Setting Up Dial-In Service Manual

Nokia Mobile Phones
Available connection speeds are:
Connection type
Normal data call
High-speed data call
When HSCSD connections are used, the user may control how many time slots are used for the connection. Some
GSM operators may charge on a slot amount usage basis, while other GSM operators may implement a fixed charging
model for HSCSD calls. Please contact your network operator for HSCSD coverage and charging details.
Modem init string is empty by default, but any valid GSM AT command can be typed here (start the string with "at").
AT strings are used to configure the internal modem of the Nokia 9290 Communicator. If you experience problems
when creating data calls, please contact your GSM network operator or Internet service provider, who may provide a
suitable configuration string for this setting.

2.3.5 Call Back

Today it is very important to have the best available security in Internet connections. One feature to increase security
in the Nokia 9290 Communicator is support for call back on a PPP link. The other advantage of the call back is to
control phone costs of mobile terminals.
When using call back in the Nokia 9290 Communicator, call back is requested during PPP negotiation. After
negotiating call back, the remote server should close the connection and call back within one minute (60 seconds)
using the same connection rate which was used to connected to the call back server.
There are three call back modes available:
IETF PPP callback with a server-specified number (type 0)
Microsoft Callback with a server-specified number
Microsoft Callback with a client-supplied number
Use call back is used to set call back feature on or off. If this is set to "Yes", the callback will be negotiated during the
PPP link configuration phase.
Call back type contains three alternatives. The first two options (MS call back and IETF call back) will use server
number call back, meaning that the call back number is stored in a database on the remote server. The remote server
finds the correct call back number after the client has authenticated itself to the server.
Copyright  Nokia Corporation 2001-2002. All rights reserved
Remote modem type
Analog
ISDN V.110
ISDN V.120
Analog
ISDN V.110
ISDN V.120
Nokia 9290 Communicator
Setting Up Dial-In Service
1 time slot 2 time slots
Autobauding, Not available
9600, 14400
9600 or 14400 Not available
9600 or 14400 Not available
9600-14400 19200-28800
9600-14400 19200-28800
9600-14400 19200-28800
.
6 (11)
3 time slots
Not available
Not available
Not available
Not available
28800-38400
28800-43200