Table of Contents
Advertisement
Quick Links
Cruise N Comfort USA
WiFi Thermostat - Installation Manual
Introduction
The WiFi Thermostat provides precise temperature control of a heating and cooling system.
When connected to the Internet, the mobile app and website allow you to control the thermostat
remotely. The thermostat and mobile app include an away feature that overrides the schedule to
lower the temperature and increase energy savings. The thermostat is designed to support radiant
floor heating and optional floor sensors can be installed to enhance comfort and protect floor
coverings.
Features
• Mobile app for iOS and Android
• Supports optional floor sensor
• Automatic software updates
• Outdoor temperature
• Local weather
• Email error and warning notifications
• Time clock updated from Internet
• 7 day programmable schedule
• Away energy savings mode
• Early start
• Energy monitoring
• English/Français/Español languages
• 3.5" color touchscreen
• Selectable background colors
Advertisement
Table of Contents
Summary of Contents for Cruise N Comfort 562
- Page 1 Cruise N Comfort USA WiFi Thermostat - Installation Manual Introduction The WiFi Thermostat provides precise temperature control of a heating and cooling system. When connected to the Internet, the mobile app and website allow you to control the thermostat remotely. The thermostat and mobile app include an away feature that overrides the schedule to lower the temperature and increase energy savings.
-
Page 2: Important Safety Information
Important Safety Information It is your responsibility to ensure that this thermostat is safely installed according to all applicable codes and standards. Cruise N Comfort is not responsible for damages resulting from improper installation and/or maintenance. This is a safety-alert symbol. The safety alert symbol is shown alone or used with a signal word (DANGER, WARNING, or CAUTION), a pictorial and/or a safety message to identify hazards. -
Page 3: Installation Preparation
Installation Preparation: Tools Required ------------------------------------------------------ • Flat Blade or jeweler screwdriver • Phillips head screwdriver • Wire stripper • Drill (for wall anchor) • 3/16" drill bit (for wall anchor) Materials Required ————————————————————————— • 18 AWG LVT Solid Wire (Low Voltage Connections) Installation Installation Location ------------------------------------------------- Consider the following: •... -
Page 4: Mounting The Thermostat
Mounting The Thermostat To prevent the risk of personal injury and/or death, make sure power is not applied to the thermostat until it is fully installed and ready for final testing. All work must be done with power to the circuit being worked on turned off. Please be aware local codes may require this thermostat to be installed or connected by an electrical Relay Power Jumpers... - Page 5 Application 562-1 The WiFi Thermostat 562 operates a one or two-stage furnace for heating and an air conditioner for cooling. Mechanical ———————————————————————————— Legend C1 = Air Conditioner F1 = Furnace T1 = WiFi Thermostat 562 Electrical ----------------------------------------------------------- Thermostat jumpers: J1 = On...
- Page 6 Application 562-2 The WiFi Thermostat 562 operates a first stage radiant floor and a second stage furnace for heating, and an air conditioner for cooling. Mechanical ————————————————————————————— Legend F1 = Furnace. S1 = Optional Floor Sensor 079 B1 = Boiler...
- Page 7 Application 562-4 The WiFi Thermostat 562 operates a first stage baseboard/radiator and a second stage fan coil for heating, and an air conditioner for cooling. Mechanical ——————————————————————————— Legend F1 = Fan Coil T1 = WiFi Thermostat 562 B1 = Boiler...
-
Page 8: Sequence Of Operation
Sequence of Operation Heating Operation: The Heat On symbol is shown on the display when the thermostat is heating. Heating for freeze protection is provided whenever the air or floor temperature falls below 40°F (4.5°C), regardless of operating mode. Regular Heating ------------------------------------------------- W1 relay is on when the air temperature falls 1.5°F (1°C) below the Heat To setting. -
Page 9: User Interface
User Interface Home Screen After 60 seconds of inactivity, the thermostat home screen displays only the time and the temperature. -
Page 10: User Settings
User Settings Away Use the Away setting to save energy when the building is unoccupied. The away setting is shared to: • All WiFi Thermostats in a mobile app "Location" Schedule:... - Page 11 Schedule:...
- Page 12 Time: When connected to the Internet, the time can be set automatically. The time and date can be manually set by highlighting a field and then using the or buttons. Choose from the time options listed below Incorrectly setting the time and date manually may prevent the thermostat from communicating to the mobile app.
- Page 13 WiFi: Before using the WiFi features of this product, you must accept the Terms of Use, as amended from time to time and available at tekmarConnect.com/terms. If you do not accept these terms, this product can still be used without WiFi features. This product requires WiFi WPA security. WEP is not supported.
-
Page 14: Installer Setting
Installer Setting Setup: The Setup menu contains five sub-menus that determine how the thermostat operates. The Access Level setting in the Toolbox menu determines how many settings are available to the user Press back to return to the main settings menu. Setup - Toolbox:... - Page 15 Setup - Temp:...
- Page 16 Setup - Sensor: Setup - Alerts:...
-
Page 17: Setup - Relays
Setup - Relays... - Page 18 Tekmar Connect Web and Mobile App To view and adjust the WiFi Thermostat using a mobile phone or tablet, download the tekmar Connect mobile app from the Apple® iTunes® Store or from the Google Play® Store. Alternatively, go to tekmarConnect.com for web browser access. Add Thermostat to App————————————————————————————...
- Page 19 Using the App...
- Page 20 Troubleshooting Error Message When an error occurs an email notification will be sent to the registered tekmar Connect mobile or web app account owner Description: MEMORY ERROR The thermostat memory settings are corrupted. To clear, load the factory defaults in the Toolbox menu.
- Page 21 Technical:...
Need help?
Do you have a question about the 562 and is the answer not in the manual?
Questions and answers