Nokia 8810 Connection Manual

Infrared connection guide

Hide thumbs Also See for 8810:

Download this manual See also: User Manual, Quick Manual

Quick Guide to Using The Nokia 8810 with an Infrared data

1. INSTALLATION OF THE NOKIA 8810 IRDA SUPPORT ON WINDOWS CE DEVICE

1. Unzip N8810_CE.zip file.

2. Read Readme.txt and licence.txt documents.

3. Connect your Windows CE device to your PC using "Windows CE services" software provided by

Microsoft.

4. Run the Setup.exe in PC. First you will see Nokia IrDA update setup window.

Figure 1: Nokia IrDA Update Setup.

5. Click Setup – Now your PC is establishing connection to Windows CE device.

6. If PC – Win CE connection is not active you will see the warning (Figure 2). Click OK and activate

connection between your PC and Windows CE device.

Figure 2: Pending application Install.

Figure 3: Connecting to Windows CE device.

7. Click Yes.

1995 - 1998. Nokia

Nokia 8810

21.12.98

connection in Windows CE device

1(3)

Page 1 3. Connect your Windows CE device to your PC using "Windows CE services" software provided by Microsoft. 4. Run the Setup.exe in PC. First you will see Nokia IrDA update setup window. Figure 1: Nokia IrDA Update Setup. 5. Click Setup – Now your PC is establishing connection to Windows CE device.
Page 2 - If you have problems with autoscan run reg8810 again and select COM3. Note: You must activate infrared connection in Nokia 8810 phone every time you want to use it. You will see the flashing infrared sign on the phone when it is waiting for infrared connection and stationary infrared sign on the phone when connection is active.
Page 3 The contents of this document is provided "as is". Except as required by the applicable law, no warranty of any kind, either express or implied, is made in relation to the accuracy, reliability or content of the document. Nokia reserves the right to revise the document or withdraw it at any time without prior notice.