Advertisement
2.
Connect one of the paired RF modules to the left side of the USB
module.
3.
Separately, connect the second RF module into the left side of a
charged battery module. Note: press and hold the button on the front of
the battery module: if a light comes on, than the battery has sufficient
power. If no light comes on, than you must charge the battery some
more.
4.
Connect whichever sensors you wish to use into the left side of the
second RF module (which is connected into the battery). Note: You
can conduct experiments with up to 5 NeuLog sensors using the RF
modules.
5.
Open the NeuLog software; it will automatically search for sensors.
6.
Once your sensors are detected you are ready to begin collecting data
wirelessly!
For reference, the image below demonstrates roughly how your setup
should appear.
NEULOG RADIO FREQUENCY COMMUNICATION MODULE GUIDE
Frequency
Bit Rate
Maximum
Range
Included in package:
Maintenance and storage:
Warranty:
We promise to deliver our sensor free of defects in materials and
workmanship for a period of 3 years from the date of purchase. Our
warranty does not cover damage of the product caused by improper use,
abuse, or incorrect storage. Sensors with a shelf life such as ion selective
proves have a warranty of 1 year. Should you need to act upon the warranty
please contact your distributor. Your sensor will be repaired or replaced.
Specifications:
2.4 GHz DSSS
(Direct-sequence spread spectrum)
1 Mbps
20 meters in open air.
2 NeuLog RF communication modules
NeuLog RF communication module instruction guide (this
document)
Never submerge the NeuLog plastic body in any liquid.
After use, gently wipe away any foreign material from the RF
module
Store in a box at room temperature out of direct sunlight.
Advertisement
