Advertisement
8) Install the unused air filters (Replacement air filters).
Hold the air filters with the protrusion up towards the top panel as shown in the picture and
z
insert them until you hear a "click" sound.
Make sure the direction of filters are properly. Failure to do so will result in installation
z
failed.
9) Connect the power plug to the power outlet and then turn on the Power. Press
<MENU> button to display main menu.
10) Press ▲▼ to select [Options] and then press ► to display sub menu.
11) Press ▲▼ to select [Lamp Settings] and then press ► to display the setting
dialog box.
12) Press ▲▼ to select [Clear Lamp Hours] and then press ► to display adjusting
box.
13) Press ▲▼ to select [Yes] and then press ►.
The lamp usage time is reset.
z
14) Press <MENU> button to return to sub menu.
15) Press ▲▼ to select [Dust Filter Reminder] and then press ► to display the
setting dialog box.
16) Press ▲▼ to select [Cleaning up Reminder] and then press ► to display the
adjusting dialog box.
17) Press ▲▼ to select [Yes] and then press ►.
The air filter usage time is reset.
z
Attention
After replacing the air filters, make sure to reset the usage time in the [Cleaning up
z
Reminder] menu.
The air filters must always be installed in the projector. Failure to do so will result in
z
malfunctions due to foreign materials, such as dust, entering the projector.
- 9
ENGLISH
Advertisement
