Security Settings; Restore Factory Settings - Nokia 7280 User Manual

S e t t i n g s

■ Security settings

When security features that restrict calls are in use (such as call restrictions,
closed user group and fixed dialing), calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security settings and one of the following:
PIN code request—Sets the phone to request your PIN code every time the phone is
switched on. Some SIM cards do not allow the PIN code request to be turned off.
Call restrictions (network service)—Restricts incoming and outgoing calls.
A restriction password is required.
Fixed dialing—Restricts your outgoing calls and text messages to selected phone
numbers if this function is supported by your SIM card. The PIN2 code is required.
When fixed dialing is on, GPRS connections are not possible except while sending
text messages over a GPRS connection. In this case, the recipient's phone number
and the message center number have to be included in the fixed dialing list.
Closed user group (network service)—Specifies the group of people whom you can
call and who can call you. For more information, contact your service provider.
Security level—Select Phone and the phone will request the security code
whenever a new SIM card is inserted into the phone. Select Memory and the
phone will request the security code when the SIM card memory is selected and
you want to change the memory in use. See Settings on page 37.
Access codes—Changes the security code, PIN code, PIN2 code, or restriction
password. Codes can only include numbers from 0 to 9.

■ Restore factory settings

You can reset some of the menu settings to their original values.
1. Select Menu > Settings > Security settings > Restore factory settings.
2. Enter the security code (the default is 12345), and select OK.
Data that you have entered or downloaded is not deleted. For example, names
and numbers in Contacts are not affected.
56