Jorjin JREALITY J7EF User Manual

J7EF
User's Guide
Jorjin Technologies Inc.
AR Smart Glasses
Appearance/Function Diagram
Glasses Side
Camera &
protection cover
Light sensor
Nose pads
Dual eyes
Si-OLED screen
Included Items
AR Smart Glasses Lens Holder
Type C Power Cable Connection
TYPE C Female for J7EF
USB-A for powerbank
TYPE C Male for host device
Function Control
• J-Reality Control is an application for Android devices,
suitable for the operation of AR smart glasses,
including the following functions.
- Display and adjust screen brightness and volume
- Allows switching between 2D and 3D modes, only support
side by side in 3D mode.
- Allows to lock the screen of the smart device to prevent
accidental operation.
• The link below is supplementary
information for functional
operations:
https://www.jorjin.com/products/
ar-smart-glasses/j-reality/j7ef/
Visor
• When the environment is too bright, it may affect the
viewing experience. You can solve this problem by
attaching the shade supplied.
• Shade is magnetic and can be attached easily.
Lens Holder
•
The lens holder is an additional accessory. Users can visit a general glasses store to consult an optician to install user's
prescription lens. The cost of the prescription lenses must be borne by the customer.
Insert glasses
Lens(W x H) 54x24 mm
Nose width 20 mm
Frame PD 70 mm
Curve 4
Interface Box
Temples TYPE-C connector
3.5mm head
phone jack
Interface box
Clip
Connection cable
Nose Pads
Visor Carry Box
Calibrate the Magnetic Sensor
If the magnetic sensor is not operating correctly, wave the
headset in a figure 8 shape while a smart device is connected
to calibrate the sensor.
Camera Operating
• Download the Google Play app "USB Camera" to operate the
camera on the AR smart glasses.
If the camera of the smart device is active, please switch to
•
USB camera mode.
You can use Jorjin's JJSDK for Android application
•
development. If you have any request, please contact Jorjin
sales staff.
How To Wear
1. Hold both sides of the AR smart glasses and gently open the temples with your thumbs.
2. Open the temple tips about one centimeter each, and wear it from the forehead at
a slight angle.
3. Push the AR smart glasses near the face until you see a clear image.
1
Hold
Connect Host Device
• Connect the TYPE-C cable of the AR smart glasses to the host device.
- Connect a host device that supports USB Type-C Display Port Alternate Mode.
- You need to use your own host device.
- This product is powered by the battery in your host device. Please make sure that the host
device is fully charged before use.
- Be sure there is no casing or protective case of the host device which may block the USB
Type-C port.
- We can't guarantee that your own USB adapter or conversion cable be supported.
- Make sure that the host device is turned on and not in sleep mode.
- You need to adjust the position of AR smart glasses after wearing them to make sure that
you can see the image properly. Each person may have a viewing experience of its own.
Connect To Headset
Connect headset to the headphone jack of the interface box.
•
We suggest to use a headset that is conform by CTIA
standard.
• When using a 3-pole headset, the microphone will not function.
TYPE-C cable
• If you need to connect/unplug the headset or the USB Type-C
connector when playing content, please remove the headset
first to avoid hearing the noise.
Please use the volume keys on the smart device to adjust the
•
volume.
We cannot guarantee that any adapter will work properly.
•
Volume+
Volume-
Type C Power Cable
Specification
Optics Material
Panel size
Resolution
Angle of view
Virtual screen size
Color reproduction
Sensor
Camera
Magnetic
Gyrometer
Acceleration sensor
Ambient Light Sensor
Audio
Audio jack
Video Input
USB Type-C
Data
Communication
USB Type-C
Power
USB Type-C
Supported
format
Supported 3D
Headset Exterior dimensions
Common
Interface box Exterior dimensions
Information
Weight
Cable length
Operating temperature
Storage temperature
*This product only applies to USB Type-C DisplayPort Alternate Mode, but not all mobile phones that meet this
specification are compatible. Please refer to the Jorjin official website for compatible mobile phones.
*Please remove the protective film before using
•
The visual impact point
The visual impact point is about
120 inches (diagonal) at five
meters. Visual experience may
differ person by person.
2
Slight force with thumbs
Video Control
Connect a smart device that supports USB Type-C DisplayPort
•
Alternate Mode, AR smart glasses will display the content of
the screen of the smart device. Unplug the TYPE-C cable, AR
smart glasses will stop displaying the screen.
If you press the power button on the smart device after
•
connection, the video and audio will stop working.
• Press the power button on the smart device again, and the
video and audio will restart working.
• If you need to pause or stop the video, please operate the
smart device.
Si-OLED
0.453" wide panel (16:9)
1920 x 1080
Approximately 34 degrees (diagonally)
120" support (virtual viewing distance 5m)
24bit color (approximately 16,770,000 colors)
8 million pixels
Yes,3 Axis sensor in smart glasses
Yes,3 Axis sensor in smart glasses
Yes,3 Axis sensor in smart glasses
Yes,1- 65528 lux
3.5 Φ 4 mini jack, CTIA type
Video interface
EDID
HDCP
USB protocol
Windows
Android
USB Type-C @1.5A
Power consumption
Rated input voltage/Current
Side-by-side format
200 x 182 x 55 mm (without the visor)
60 x 31 x 20mm
135g ± 15g
109cm
5 to 35°C humidity 20 to 80%
-10 to 60°C humidity 20 to 80%
•
3D Vision Warning
Long periods of viewing 3D images may result in eye fatigue.
(1) take 10 minutes rest after 30 minutes of use.
(2) This product must not be used by children under the age of six as their
eyesight is still developing. If a child of six years or older uses the product,
make sure they are supervised at all times and that they do not wear the
product more than 1 hour a day.
Manufacturer ： JORJIN TECHNOLOGIES INC.
Address ：17F, No. 239, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City 22161, Taiwan R.O.C.
3
Wear it from
the forehead
4
Push back until
image is clearly
USB Type C
Host
Device
Prefix condition:
AR Smart Glasses are connected
with the Smart device
Power
1 press:Hide the screen & audio
Press again:Show the screen & audio
Stop playing video:Operate smart device
DisplayPort Alternate Mode (DP Alt Mode)
Supported
Supported
USB 2.0
Windows 10 or later
Android 8 or later
6W
5.0V/1.2A
•
RoHS
[Restricted substances Containment]
Please go to the following
website to inquire.
https://www.jorjin.com/products/
ar-smart-glasses/j-reality/j7ef/
Tel ： +886-(02)-2649-0055