AR-210 Manual
Example:
YAESU (Mobile radio. - Some model requires Diode instead of pull-up resistor)
Example:
Mobile and Portable transceivers with multi-pin jack.
Example:
Portable transceiver with stereo type jack, ALINCO (Some portables)
POWER SOURCE
To power your TNC, you will either need the NiCad battery pack or an external power supply. An
external power supply must be able to provide 10 to 13.8 VDC at 100 mA. If you install the NiCad
Battery pack and wish to charge its battery from your external power supply, the power supply
should be able to provide at least 200 mA. The plug which comes with the AC power adaptor
should be the matching plug and polarity. Refer to Figure 1-3.
Figure 1-3
Page 12
1-7