Network; Enhancements; Voice Commands; Add A Voice Command To An Application - Nokia 6681 User Manual

Network

Operator selection—Select
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.

Enhancements

Indicators shown in the standby mode:
A headset, music stand, or Bluetooth wireless
technology device is connected.
A loopset is connected.
96 Copyright © 2005 Nokia. All rights reserved.
Automatic to set the phone
On to set the phone to indicate
A car kit is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Carkit, Bluetooth
and the following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See 'Set tones', p. 12.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.

Voice commands

You can use voice commands to control your phone. You
record voice commands in the same way as voice tags. See
'Add a voice tag', p. 28.
Press , and select Tools

Add a voice command to an application

You can have only one voice command per application.
1
Select the application to which you want to add a voice
command.
handsfree, or Loopset
> Voice com.