Advertisement
Figure 4. Uncheck the Wait for
Dial tone before dialling check
box and tap Finish.
Tip: If you wish to make a HSCSD connection then type the following dial-string in
to the Extra dial-string... box:
Extra dial-string modem commands:
+cbst=16,0,1;+chsn=4,3,0,4 (to get 28.8 Kbps modem connection)
+cbst=81,0,1;+chsn=6,3,0,8 (to get 38.4 Kbps ISDN v.110 connection)
+cbst=50,0,1;+chsn=6,3,0,8 (to get 43.2 Kbps ISDN v.120 connection)
* If you wish to make a GPRS connection then put Access point name either to
your phone or put the following AT command to Extra dial-string...box:
+cgdcont=,,"xxx" (NOTE! xxx refers to Access Point Name which you will get
from your GSM operator)
Figure 5. Now go to Dialling leaflet
and go to Dialling Patterns...
Figure 6. In some cases you may
need to edit these to get the phone
number right when dialling.
2/4
Advertisement
