Advertisement
Compliance Statements
Warning!
Sensus devices are for professional installation only. They are to be servied by pro-
fessional personnel only. This product is NOT for consumer installation or servicing.
RF Radiation Hazard!
In order to satisfy the FCC RF exposure limit for transmitting devices, a separation
distance of the following must be maintained:
•
366 cm (12 ft.) while operating the Sensus M420 transceiver with the M400G2
PA and a 12.15 dBi antenna
•
371 cm (12.17 ft.) while operating the Sensus M420 transceiver with a M420PA
and a 12.15 dBi antenna
•
918 cm (30.11 ft.) or more while operating the Sensus M420 transceiver with
the M400G2 PA and a 20.15 dBi antenna
•
931 cm (30.54 ft.) or more while operating the Sensus M420 transceiver with
the M420 PA and a 20.15 dBi antenna
To ensure compliance, operations at closer than this distance are not
recommended. This minimum safe distance is required between personnel and this
antenna of this device.
Note: CFR 47 Part 101 limits the radiated power to 1,000W in the 941.0 MHz to 941.5 MHz
frequency band. Use of a 20.15 dBi antenna may require the use of an inline RF attenuator.
Professional installation required.
RF Radiation Hazard!
In order to satisfy the ISED RF exposure limit for transmitting devices, a separation
distance of the following must be maintained:
•
544 cm (17.85 ft.) while operating the Sensus M420 transceiver with the
M400G2 PA and a 12.15 dBi antenna
•
552 cm (18.11 ft.) while operating the Sensus M420 transceiver with a M420PA
and a 12.15 dBi antenna
•
1367 cm (44.85 ft.) or more while operating the Sensus M420 transceiver with
the M400G2 PA and a 20.15 dBi antenna
•
1386 cm (45.47 ft.) or more while operating the Sensus M420 transceiver with
the M420 PA and a 20.15 dBi antenna
To ensure compliance, operations at closer than this distance are not
recommended. This minimum safe distance is required between personnel and this
antenna of this device.
Afin de satisfaire la limite d'exposition RF ISED pour les appareils de transmission,
une distance de séparation de éléments suivants doit être maintenue:
•
544 cm (17,85 ft.) ou plus pendant le fonctionnement du Sensus appareil
(M420 émetteur-récepteur avec le M400G2 PA et un antenne de 12,15 dBi)
•
552 cm (18,11 ft.) ou plus pendant le fonctionnement du Sensus appareil
(M420 émetteur-récepteur avec le M420 PA et un antenne de 12,15 dBi)
•
1367 cm (44,85 ft.) ou plus pendant le fonctionnement du Sensus appareil
(M420 émetteur-récepteur avec le M400G2 PA et un antenne de 20,15 dBi)
•
1386 cm (45,47 ft.) ou plus pendant le fonctionnement du Sensus appareil
(M420 émetteur-récepteur avec le M420 PA et un antenne de 20,15 dBi)
Pour assurer la conformité, un fonctionnement à distance inférieure à celle est
pas recommandée. Cette distance minimale de sécurité est nécessaire entre le
personnel et l'antenne de cet appareil.
Note: SRSP-505 limits the radiated power to 250W, 600W, or 2,500W depending on the use
case in the 941.0MHz to 941.5MHz frequency band and in the 952.0MHz to 953.0MHz
frequency band. SRSP-509 limits the radiated power to 2,500W in the 930.0MHz to
931.0MHz frequency band and in the 940.0MHz to 941.0MHz frequency band. Use of a
20.15 dBi antenna may require the use of an inline RF attenuator.
Warning!
The antenna used for this transmitter must not be co-located in conjunction with
any other antenna or transmitter.
Attention!
For Class B - Unintentional Radiators:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful in-
terference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different form that to which
the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Warning!
Hazardous voltages are present: to reduce the risk of electric shock and danger to
personal health, follow the instructions provided in the product manual.
Attention!
Any modifications made to this device that are not approved by Sensus may void
the authority granted to the user by the FCC to operate equipment.
Attention!
ICES-003 Class B Notice—Avis NMB-003, Classe B
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil nu-
merique de la classe B est conforme à la norme NMB-003 du Canada.
Warning!
When applicable, there is danger of explosion if batteries are mishandled or incor-
rectly replaced. On systems with replaceable batteries, replace only with the same
manufacturer and type or equivalent type recommended per the instructions pro-
vided in the product manual.
Do not disassemble batteries or attempt to recharge them outside the system. Do
not dispose of batteries in fire.
Dispose of batteries properly in accordance with the manufacturer's instructions
and local regulations.
Warning!
For products with multiple power cords, all power cords must be disconnected to
completely remove power from the system.
Warning!
For products that use power cords, not all power cords have the same current
ratings. Do not use the power cord provided with your equipment for any other use.
Household extension cords do not have overload protection and are not meant
for use with computer systems. Do not use household extension cords with your
Sensus product.
Warning!
Do not dispose in fire, mix with other battery types, charge above specified rate,
connect improperly, or short circuit, which may result in overheating, explosion or
leakage of cell contents.
Warning!
This radio is intended for use in occupational/controlled conditions, where users
have full knowledge of their exposure and can exercise control over their exposure
to meet FCC limits. This radio device is NOT authorized for general population, con-
sumer or any other use.
Warning!
Sensus products are designed to be connected only to a grounded main circuit
outlet. Do not defeat the plug grounding pin and do not plug these products into a
non-grounded main power circuit.
Attention!
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux ap-
pareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'ap-
pareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Attention!
This radio transmitter, M420 Transceiver, has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain
and required antenna impedance for each antenna type indicated. Antenna types
not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
Le présent émetteur radio, M420 Transceiver, a été approuvé par Industrie Canada
pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain ad-
missible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
•
DIPOLE 10dBd (12.15 dBi)
•
DIPOLE 18 dBd (20.15 dBi)
Advertisement
