Advertisement
Available languages
Available languages
EN
WARNING INDICATORS
1."EEr" means system parameter fault, please contact after-sales service station.
2. When total amount exceeds 9999.99, display amount as "--------".
3. When scale is overloaded, display weight reading as "--------- ".
4. Low power indicator light or flash, means battery power is low. The scale can be used for a short period of time. Please charge as soon as possible.
5. Display "Lo" when switching on, means battery power is too low to work. Please charge as soon as possible.
HOW TO CHARGE
Low power indicator "Lo" or "
DC socket of the scale.
1. Charging when scale power off.
Display weight flash as "----" during charging, when it stop flash and display "----" stably means the battery will be full after 2 hours.
2. Charging when scale power on.
(For JC models only) Status icon "
3. Please make sure the scale switched on when charging.
CARE & MAINTENANCE
1. Keep the scale away from rain and avoid water getting inside the scale.
2. DO NOT store the scale in high temperature or high humidity area.
3. DO NOT strike, shock or overload the scale.
4. DO NOT reverse polarity of the storage battery (Connect red wire to red port, and blue wire to blue port).
TECHNICAL SPECIFICATION Μodel DS4010
Tabletop Scale 40 kg / 10 g, Double Screen, LCD screen with green backlight, price computing function, accumulate change, built-in 4v/4ah rechargeable
battery, AC/DC charger, 3 months operating time on full charge, automatic energy saving mode.
OPERATION
Place the scale on a flat and solid platform; adjust the 4 feet screws to make sure the scale is horizontal; place on specialized plate (if necessary) and switch
on the scale. Do not use under TARE mode, for long time or the scale can not trail zero point automatically.
Key illustration
1. [ON/OFF] Switch on/off. Start weighing when "Zero", "stable" symbols appear. Press this key to switch off the scale after use.
2. [Zero] Reset weighing reading to zero (applicable when weight reading ≤4% full capacity)
3. [Tare] Reset weighing reading to zero ("Tare" symbol appears)
4. [Key 0 ~ 9] Input digit. If no operation for 3 seconds, press these keys can clear the current digit and input new digit
5. [ . ] Input decimal of the unit price
6. [C] Clear the unit price or amount
7. [M+]
1. During weighing, press this key to add on amount. "add on symbol" appears, weight reading display window shows "Add", unit price display window shows
add on times, amount display window shows total amount. If amount is zero, this key is not applicable. Press any digit key to exit current add on operation
(but the add on result will be memorized) and back to weighing mode.
2. If no weighing, press this key to see the add on amount. Weight reading display window shows "tot", unit price display window shows total add on times,
amount display window shows total amount. Press any digit key to exit current add on operation (but the add on result will be memorized) and back to weighing
mode.
8.[MC] Clear memorized add on result. Exit add on mode, "add on symbol" disappears.
9.[Give change/kg.lb] Activate money change function. Weight reading display window shows "-CHA-", amount display window shows "-------". Press digit keys
to input the amount of received money (press [ C ] to clear input), and amount display window will show the amount of change. Press [Give Change/kg.lb] key
again to exit Change function and back to weighing mode. *Under weighing mode, press this button for 3 seconds. The scale will beep, meaning unit conversion
is activated. LCD shows the current weight unit.
2
" flash, means battery power is low and need to charge. Connect the adaptor plug to power source and the other end connect
" flash during charging, when it stop flash means the battery will be full after 2 hours.
WWW.BORMANNTOOLS.COM
Advertisement
