Samsung SCX-FIN20S Service Manual page 24

Code Errors & Faults
(SEC) message
07-010 Rear Jogger Fault
07-011 Support Finger
Fault
07-012 Ejector Fault
07-013 Stapler Fault
07-014 Stacker Fault
Service Manual
Troubleshooting
Descriptions
Rear Jogger unit s not
operational
Rear Jogger unit s not
operational
Ejector unit s not
operational
Stapler is not operational
Stacker unit s not
operational
4-7
Solution
Open the finisher door and clear
any jammed paper (if there is). If
this error message shows on the
screen again, cycle power.
Remove paper from the output
tray (finisher). If this error
message shows on the screen
again, cycle power.
Remove paper from the output
tray (finisher). If this error
message shows on the screen
again, cycle power.
Remove paper from the output
tray (finisher) and open the
finisher door to clear the
jammed paper. If this error
message shows on the screen
again, cycle power.
Remove paper from the output
tray (finisher). If this error
message shows on the screen
again, cycle power.
SAMSUNG ELECTRONICS
Message
type
Fault
Fault
Fault
Fault
Fault