Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for REKKORD AUDIO RCM
Summary of Contents for REKKORD AUDIO RCM
- Page 1 INSTRUCTIONS FOR USE Rekkord RCM...
- Page 2 © Rekkord Audio · Rekkord RCM · Revision 2022.10.18...
- Page 3 Replacement adhesive strips for vacuum arm AC power cord Optional accessories (available on request) ➢ Ready-to-use cleaning fluid bottle sizes: 250ml/500ml/1l ➢ Goat hair brush ➢ Adhesive strips for vacuum arm © Rekkord Audio · Rekkord RCM · Revision 2022.10.18...
- Page 4 ("Main switch", "Rotation" and "Vacuum" should be in position "0"). Connect the power cord to the socket on the rear side of RCM and turn the main switch to the "I" position. Place a record on the platter and screw the clamp (9) on the spindle.
- Page 5 This will help to keep all internal parts of the unit dry and significantly lower the possibility to be affected with rust. For the same reason it is also not recommended to pack the RCM back into its plastic bag from original packaging.
- Page 6 How to adjust the height of RCMs record platter The Rekkord RCM is pre-adjusted to spec for standard 80 – 180 g records. There is enough headroom, so that the arm is optimally pressed against the record and the cleaning fluid can be completely removed. The vacuum arm works best when it is parallel to the record when operating and the adhesive strips is pressed gently on the surface of record.
- Page 7 Modification or change to any part of the product by unauthorized persons will void the manufacturer’s warranty. Most Rekkord Audio products – unless expressly advertised otherwise – are intended for domestic use only. Using them for business applications are done so at your own risk.
Need help?
Do you have a question about the RCM and is the answer not in the manual?
Questions and answers