Terberg YT 3 Series Operation Manual

Terberg YT 3 Series Operation Manual

Yard tractor
Table of Contents

Advertisement

Quick Links

OPERATION MANUAL
Document:
TD2886-04EN
Date:
2022-08
YTxx3
Yard Tractor

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YT 3 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Terberg YT 3 Series

  • Page 1 OPERATION MANUAL YTxx3 Yard Tractor Document: TD2886-04EN Date: 2022-08...
  • Page 2 Operation Manual YTxx3 TD2886-04EN - Page 2 of 101 Terberg Benschop 2022-08...
  • Page 3 Chapter Added: option Tyre Pressure Monitoring (TPMS) 7.13 Added: Fifth wheel height calibration 7.7.1 Changed: Coolant level Changed: Couple & Uncouple a trailer 6.8.2 Added: Additional options Changed: Exhaust particle filter TD2886-04EN - Page 3 of 101 Terberg Benschop 2022-08...
  • Page 4: Table Of Contents

    Air blower (optional) ................35 Instruments and controls ............... 37 Parking brake lever ................37 Operation ..................38 Parking brake test (optional) ............. 38 Trailer brake lever (optional) ............. 38 Driver operating console ..............40 TD2886-04EN - Page 4 of 101 Terberg Benschop 2022-08...
  • Page 5 Initialisation and Start screen ............56 Screen navigation icons ..............56 Display settings ................. 57 Specific view selection function ............58 Specific view screens ................ 59 Important error messages ..............59 TD2886-04EN - Page 5 of 101 Terberg Benschop 2022-08...
  • Page 6 Wheels and tyres ................... 81 7.13 Tyre Pressure Monitoring System display, TPMS (optional) ....82 Activation ..................82 Operation ..................82 Settings..................... 83 7.14 Tyre pressure and wheel load ............... 83 TD2886-04EN - Page 6 of 101 Terberg Benschop 2022-08...
  • Page 7 Underlying metal damaged: .............. 97 Electrical equipment ................97 Batteries .................... 98 Fuses, relays and converter .............. 99 Fuses ....................99 Relays and converter ..............100 Headlamp ..................... 101 Light bulb replacement ..............101 TD2886-04EN - Page 7 of 101 Terberg Benschop 2022-08...
  • Page 8: Introduction

    Please read this carefully. Terberg shall not be liable for any external equipment that does not form part of the supply contract. All information markings and symbols on the tractor conform to general operator standards to the best of our knowledge.
  • Page 9: Abbreviations And Phrases

    European Tyre and Rim Technical Organization. GVW: Gross Vehicle Weight. GCW: Gross Combination Weight. VIN: Vehicle Identification Number. Terberg Connect: A telematics solution for transferring data from vehicle to server. SCR: Selective Catalytic Reduction. TD2886-04EN - Page 9 of 101 Terberg Benschop 2022-08...
  • Page 10: General Lay-Out Of The Tractor

    General lay-out of the tractor Pos.: Description: Main switch. Rear view mirror. Cabin entrance. Fuel tank. Trailer connections. Fifth wheel. Lifting frame. AdBlue tank. Batteries. Draw bar pin. Cabin tilting system. TD2886-04EN - Page 10 of 101 Terberg Benschop 2022-08...
  • Page 11: Safety

    Notices will be used to show special procedures or point out important facts. Notices will also designate important information regarding this manual and its use. All NOTICE notifications will be indicated with this BLUE symbol. TD2886-04EN - Page 11 of 101 Terberg Benschop 2022-08...
  • Page 12: Graphical Symbols

     Terberg Benschop recommends that the driver wears at least safety clothing that enhances driver visibility and safety shoes with reinforced toe caps and soles. ...
  • Page 13: Safety And Warning Stickers

    Coat hanger Hanger clip to store a coat. Speaker Audio speaker for the tractor’s radio system. Radio Sticker location Sticker location inside the cabin to point out safety to the driver. TD2886-04EN - Page 13 of 101 Terberg Benschop 2022-08...
  • Page 14: Stickers On The Vehicle

    Operation Manual YTxx3 Stickers on the vehicle TD2886-04EN - Page 14 of 101 Terberg Benschop 2022-08...
  • Page 15 Do not stand under the hydraulic lift frame (T24064022) Beware of the lift frame and keep out of its working zone. TD2886-04EN - Page 15 of 101 Terberg Benschop 2022-08...
  • Page 16 This tractor is equipped with a 3½" fifth wheel (T24064096) (optional) This tractor is equipped with a fifth wheel with a 3½ " coupling. Only trailers equipped with a 3½ " king pin may be coupled. TD2886-04EN - Page 16 of 101 Terberg Benschop 2022-08...
  • Page 17 If the tractor is prepared for driving on public roads the fifth wheel is equipped with a manual safety lock. Always keep the fifth wheel manual safety lock in locked position when driving on public roads. TD2886-04EN - Page 17 of 101 Terberg Benschop 2022-08...
  • Page 18 After a wheel change or new tractor delivery, it is mandatory to tighten the wheel nuts in the correct order after a maximum of 50 kilometres or after 8 hours of operation/driving, whichever occurs first. TD2886-04EN - Page 18 of 101 Terberg Benschop 2022-08...
  • Page 19: Permissible Loads

    Pos. Type Description Headlamp Percentage of inclination of the headlamps. inclination Configuration Terberg internal unique vehicle ID number. number Approval no. Number of type approval for technical compliance. Year of Year of build / manufacture. manufacture VIN number Vehicle Identification Number.
  • Page 20: Permissible Loads On Ramps

     Always make sure that you are in driving position; in the driver’s seat with the seat belt buckled up.  Ensure that maximum permissible loads and speeds are not exceeded. TD2886-04EN - Page 20 of 101 Terberg Benschop 2022-08...
  • Page 21: While Driving On Ramps

    However, the parking brake must be used as an emergency brake if the tractor's service brakes fail.  The tractor must be maintained by trained personnel in accordance with the manufacturer’s instructions. TD2886-04EN - Page 21 of 101 Terberg Benschop 2022-08...
  • Page 22: Emergency Procedures

    Jack-knifing means that the driver has not been able to correct a trailer that started to move sideways. The trailer takes over the direction, the driver cannot correct for the total movement nor direction of the vehicle combination. TD2886-04EN - Page 22 of 101 Terberg Benschop 2022-08...
  • Page 23: Additional Safety Measures (Optional)

    ON position and the driver’s seatbelt is fastened. Reverse activated hazard lights (optional) When the vehicle is shifted into reverse gear the hazard lights will automatically be activated. TD2886-04EN - Page 23 of 101 Terberg Benschop 2022-08...
  • Page 24: Cabin And Operating Components

    Passenger seat (optional): The cabin can be equipped with a fold-down seat including a seat belt. TD2886-04EN - Page 24 of 101 Terberg Benschop 2022-08...
  • Page 25: Open And Close The Door

    Open and close the door To increase safety at work, Terberg recommends the door to be closed at all times during operation. 3.1.1.1 To open and close the door from the outside Open: Hold the door handle and press the knob with your thumb, then pull the handle towards you, the door will open.
  • Page 26: Release The Door From The Storm Anchor

    Do not open the door while the tractor is moving. Be careful not to bump your head while entering the cabin. TD2886-04EN - Page 26 of 101 Terberg Benschop 2022-08...
  • Page 27: Seats

    Do not adjust the seat while the tractor is moving, only when the tractor is stationary and the parking brake has been applied. Always wear the seat belt provided. 3.2.1.1 Seat controls ISRI 6860 TD2886-04EN - Page 27 of 101 Terberg Benschop 2022-08...
  • Page 28 The following descriptions give information about the seat adjustment controls (ISRI seat). Seat height adjustment The upper legs must be almost horizontal with the feet flat on the floor. Your upper legs must be properly supported by the seat. TD2886-04EN - Page 28 of 101 Terberg Benschop 2022-08...
  • Page 29 The back-rest angle must be between 95 and 115 degrees. If this is not the case, repeat step 3 so that you get an angle of between 95 and 115 degrees. TD2886-04EN - Page 29 of 101 Terberg Benschop 2022-08...
  • Page 30: Steering Wheel Adjustment (Optional)

    Passenger seat (optional) As an option, a passenger seat can be installed in the cabin. To enable the passenger seat, it must be retracted downwards from the vertical position. TD2886-04EN - Page 30 of 101 Terberg Benschop 2022-08...
  • Page 31: Seat Belt

    To release the seat belt, grasp the belt and press the red button on the buckle. Gently guide the belt with your hand and allow it to retract fully. The belt will lock when the belt is stressed / pulled quickly. TD2886-04EN - Page 31 of 101 Terberg Benschop 2022-08...
  • Page 32: Radio (Optional)

    Check that the radio is working correctly and is tuned to the correct frequency/channel for the site, before driving off. Never adjust the radio while driving. For more detailed information, see the radio manufacturer's operating manual. TD2886-04EN - Page 32 of 101 Terberg Benschop 2022-08...
  • Page 33: Airconditioning And Airflow

    Temperature Rotate the dial to control the interior temperature:  Turn it anti-clockwise (towards blue) to reduce the temperature (LOW).  Turn it clockwise (towards red) to increase the temperature (HIGH). TD2886-04EN - Page 33 of 101 Terberg Benschop 2022-08...
  • Page 34 By closing the outlets more air flow is directed to the defroster outlets, which are directed at the windows. This can be used to increase demisting or to get an indirect air flow. TD2886-04EN - Page 34 of 101 Terberg Benschop 2022-08...
  • Page 35: Operation Tips

    In some situations, there are two of these additional ventilators installed in the cabin of the tractor. Air flow speed is adjusted by moving the switch (arrow) at the foot of the fan. TD2886-04EN - Page 35 of 101 Terberg Benschop 2022-08...
  • Page 36 This switch (see arrow) has three air flow positions, numbered 0 to 2.  0 = Blower off.  = Blower runs at lowest speed.  II = Blower runs at highest speed. TD2886-04EN - Page 36 of 101 Terberg Benschop 2022-08...
  • Page 37: Instruments And Controls

    When the lever is in the:  UP position: parking brake released.  DOWN position: parking brake is engaged; the vehicle cannot move.  TEST position: tractors parking brake is engaged, trailers parking brake is released. TD2886-04EN - Page 37 of 101 Terberg Benschop 2022-08...
  • Page 38: Operation

    A single-stage, separate trailer brake lever can be installed as an option. This lever has a spring return mechanism and can be used to apply the trailer brakes gradually between released and fully applied. TD2886-04EN - Page 38 of 101 Terberg Benschop 2022-08...
  • Page 39 The parking brake must not be applied while the tractor is in motion. The parking brake must be used to stop the tractor in case of emergency. (only to be applied in the event of failure of the normal service brakes). TD2886-04EN - Page 39 of 101 Terberg Benschop 2022-08...
  • Page 40: Driver Operating Console

    The fingertip lever may only be operated with the tip of the fingers. Lowering and raising is proportional, the speed of the hydraulic fifth wheel lifting depends on the stroke of the fingertip lever. TD2886-04EN - Page 40 of 101 Terberg Benschop 2022-08...
  • Page 41: Combined Turn Indicator, Main/Dipped Beam, Flash, Horn And Wipers Stalk

    The turning function of the knob on the lever activates the front windscreen wiper in the following way: = Interval (optional). = Off. = Speed 1. = Speed 2 (optional). Pressing the ring at the end of the handle operates the windscreen washer(s). TD2886-04EN - Page 41 of 101 Terberg Benschop 2022-08...
  • Page 42: Fifth Wheel Controls

    Keep clear of the underside of trailers or lifting systems during coupling. Keep the fifth wheel as low as possible. Ensure there is sufficient ground clearance and top clearance during driving. TD2886-04EN - Page 42 of 101 Terberg Benschop 2022-08...
  • Page 43: Ignition Key Switch (Optional)

    Operation Manual YTxx3 N O T I C E Terberg cannot be held liable for any external equipment other than that included as part of the supply contract. Ignition key switch (optional) The ignition key has 3 positions: 0= Off.
  • Page 44: Terberg Connect (Optional)

    • If you enter a wrong code switch the ignition , and wait 30 seconds before trying again. Led indications for the card reader Yellow Power  Green   NOT OK TD2886-04EN - Page 44 of 101 Terberg Benschop 2022-08...
  • Page 45: Remote Mirror Control (Optional)

    Also, if the ignition has been switched off, the fog light resets and must be separately operated to switch on the fog light again. TD2886-04EN - Page 45 of 101 Terberg Benschop 2022-08...
  • Page 46: Work Light (Optional)

    The switch prevents automatic regeneration or stops manual regeneration. The SCR system cleaning stop lamp illuminates when the regeneration is stopped or prevented. More information is available in the engine section. TD2886-04EN - Page 46 of 101 Terberg Benschop 2022-08...
  • Page 47: Hazard Warning Lights

    The electric window is equipped with “comfort control”, which means that if the switch is held down for more than one second, the window will automatically continue lowering until it reaches its end stop. TD2886-04EN - Page 47 of 101 Terberg Benschop 2022-08...
  • Page 48: Reverse Warning Buzzer (Optional)

    This is necessary to make turns and reduce tyre wear and mechanical overload on the drive train, it ensures optimal traction. The rear axle differential can be locked with the rear axle differential lock switch on the dashboard. TD2886-04EN - Page 48 of 101 Terberg Benschop 2022-08...
  • Page 49: Air Suspension Pressure Release (Optional)

    When the switch is released, the air bellow will fill with air again, raising the rear end of the tractor. The height adjustment of the air suspension will take control and maintain proper drive height. TD2886-04EN - Page 49 of 101 Terberg Benschop 2022-08...
  • Page 50: Fifth Wheel Height Override (Optional)

    If the fifth wheel is still mechanically locked after pressing the switch, try to put the vehicle in Neutral to eliminate any friction force between the fifth wheel and the king pin. TD2886-04EN - Page 50 of 101 Terberg Benschop 2022-08...
  • Page 51: Additional Hydraulics (Optional)

    Additional warning lights outside the DIM Trailer stand-by (optional) In general, this indicator light indicates that the trailer is in standby and is ready for use. This light can also respond to customer-specific requirements. TD2886-04EN - Page 51 of 101 Terberg Benschop 2022-08...
  • Page 52: Trailer Steer Angle Too Large (Optional)

    This warning light illuminates when a fault occurs in the hydraulic system, e.g. high oil temperature / restriction. Trailer length (optional) The trailer length light (yellow) illuminates when a fault occurs or when the trailer is shifted out. TD2886-04EN - Page 52 of 101 Terberg Benschop 2022-08...
  • Page 53: Trailer System (Optional)

    When a greasing cycle is executed, when the cartridge is (almost) empty or when there is an error, this will also be indicated. (See the central greasing manual for detailed information). TD2886-04EN - Page 53 of 101 Terberg Benschop 2022-08...
  • Page 54: Driver Information Module (Dim) Description

     Lighting indicators and symbols.  Diesel powered vehicle symbols.  Advanced Feature symbols and indicators.  Common symbols. All symbols, icons and tell-tales are listed in Paragraph 4.4. Operating components TD2886-04EN - Page 54 of 101 Terberg Benschop 2022-08...
  • Page 55  Move Up.  Move Right.  Move Down.  Move Left.   Enter key. To select a function, a value or to activate the screen icon beside the key-group. TD2886-04EN - Page 55 of 101 Terberg Benschop 2022-08...
  • Page 56: Operation Of The Dim

    Operation of the DIM Initialisation and Start screen When you turn on the ignition switch, the DIM will initialise. After initialise, the DIM shows the Terberg logo, followed by the start screen.  The start screen shows information like: speed (km/h), information...
  • Page 57: Display Settings

    Most of the advanced display settings are factory set. You can change the desired settings e.g. Language and Time settings by yourself.  Use the navigation enter key to select icon ‘Numerical values’ as shown.  A new screen called: ‘Display settings’ appears. TD2886-04EN - Page 57 of 101 Terberg Benschop 2022-08...
  • Page 58: Specific View Selection Function

    Use the navigation key group to rotate the carousel until you have selected the desired vehicle part topic. The lowest and boldest icon will be the active one, in this case ‘Vehicle’. TD2886-04EN - Page 58 of 101 Terberg Benschop 2022-08...
  • Page 59: Specific View Screens

     Select icon ‘Numerical values’ at right side of the screen.  A new screen appears in which you can make choices to check temperatures, or to check other things. TD2886-04EN - Page 59 of 101 Terberg Benschop 2022-08...
  • Page 60 Operation Manual YTxx3 Check oil temperatures Activate the icon ‘Numerical values’ and navigate to the ‘Transmission Oil Level’ screen. This screen shows extensive information about the oil level. TD2886-04EN - Page 60 of 101 Terberg Benschop 2022-08...
  • Page 61: Other Important Vehicle Information

     Function and features may very per vehicle. Each important function or feature has its own DIM screens, pop-up frames and commands.  For detailed technical information, contact your Terberg dealer. TD2886-04EN - Page 61 of 101 Terberg Benschop 2022-08...
  • Page 62: Illumination

    Use the jog dial to move the cursor (coloured bar) to one of the listed pages, for example ‘Instrument Panel’, and press button 1 – OK to select the page. A second menu is available by selecting Terberg Service Tools in the DIM menu. A list with the following options will be displayed: ...
  • Page 63: Display Symbol Overview

    The fifth wheel is not correctly locked, or the kingpin is not detected. Fifth wheel not locked Driving with a trailer attached is correctly. prohibited! Check the trailer connection before driving. TD2886-04EN - Page 63 of 101 Terberg Benschop 2022-08...
  • Page 64 The fault must be resolved by authorised obstructed / blocked. service personnel. Fault in exhaust system The fault must be resolved by authorised Yellow (optional). service personnel. High exhaust Yellow Regeneration is active. temperature. TD2886-04EN - Page 64 of 101 Terberg Benschop 2022-08...
  • Page 65 A problem or a potential problem has The transmission has been detected. Yellow failed or is mal- Have it checked or repaired. functioning. Refer to the fault code in the trans- mission manual. TD2886-04EN - Page 65 of 101 Terberg Benschop 2022-08...
  • Page 66 PTO governor (engine accelerator pedal. Yellow RPM governor) is The governed RPM value is indicated by active. a red mark on the rim of the RPM gauge. Green Power Take-Off (PTO). TD2886-04EN - Page 66 of 101 Terberg Benschop 2022-08...
  • Page 67: Digital Tachograph (Optional)

    Operational – e.g. while driving. Available – e.g. while riding as a co-driver. Resting – e.g. while resting or taking a break. Other – e.g. while inspecting or servicing the tractor. TD2886-04EN - Page 67 of 101 Terberg Benschop 2022-08...
  • Page 68: Driving The Vehicle

    The driver must adhere to safe driving instructions at all times. Drive safe and durable To ensure safe and durable operation of the tractor, Terberg provides the following driving instructions which the driver must read before driving the tractor. ...
  • Page 69: Before Driving

    Turn the ignition key to the first position (drive + preheating).  Turn the ignition key to the start position, to start the engine.  Release the ignition key after the engine has started. TD2886-04EN - Page 69 of 101 Terberg Benschop 2022-08...
  • Page 70: Stopping The Engine

    Ensure the tractor is standing completely still.  Do not press the throttle pedal, the engine must be running idle.  Shift the gearbox in drive or reverse with the gear lever. TD2886-04EN - Page 70 of 101 Terberg Benschop 2022-08...
  • Page 71: Tractor-Trailer (Un)Coupling

    A horizontal trailer makes loading/unloading also easier. During loading/unloading of the trailer, it is for the Terberg tractor not necessary to lower the trailer legs to the ground. It is a local operational decision whether this is required or not.
  • Page 72: Couple A Trailer

    Check the green light on the DIM. If it illuminates, then drive the tractor backwards slowly and carefully. This test proves that the trailer is mechanically connected to the tractor unit. The air hoses can now be connected and the trailer can now be moved. TD2886-04EN - Page 72 of 101 Terberg Benschop 2022-08...
  • Page 73: Uncouple A Trailer

     Use the cabin lift bar (stored on the left side of the driver’s seat) to unlock the fifth wheel by hand. TD2886-04EN - Page 73 of 101 Terberg Benschop 2022-08...
  • Page 74 Before uncoupling the trailer from the fifth wheel, ensure that the trailer connections (airlines and electrical connections) between trailer and tractor are disconnected. TD2886-04EN - Page 74 of 101 Terberg Benschop 2022-08...
  • Page 75: Periodic Checks And Maintenance

    C A U T I O N The maintenance in this manual is for a daily operation only. For a more comprehensive service refer to the Terberg Maintenance manual. Fuel (diesel oil) Use fuels that comply with the standards: ...
  • Page 76: Engine Oil Level

    Always top up with the same make and type of oil as is already in the engine or transmission. For more detailed information, refer to the Terberg Maintenance manual. N O T I C E Digital oil measurement not supported with the current engine Cummins B6.7...
  • Page 77: Coolant Level

    Never fill the system with water alone. A high-performance coolant which offers adequate protection against corrosion, cavitation and freezing must be used. For more detailed information about coolant, refer to the Terberg maintenance manual. W A R N I N G Never open a hot cooling system as hot coolant can cause severe burns.
  • Page 78: Fifth Wheel

    • When opening the calibration menu, there is always a pop up message with info about the calibration process. N O T I C E A level 1 password is required  Select Menu. TD2886-04EN - Page 78 of 101 Terberg Benschop 2022-08...
  • Page 79 Level 1 password.  Press the enter key to unlock the screen.  Read the instructions on the screen.  Press the enter key to select apply TD2886-04EN - Page 79 of 101 Terberg Benschop 2022-08...
  • Page 80: Air Tanks And Air Dryer

    To do so, there is a water drain valve installed at the bottom of each air tank. Pull the valve (or chain/cable connected to it) to let off any moist (see red arrows). TD2886-04EN - Page 80 of 101 Terberg Benschop 2022-08...
  • Page 81: Instruments And Lighting

    The automatic valves (option) are triggered every time the brake is applied. Do a check of both types of valves in accordance with the Terberg maintenance manual. An air dryer extracts water from the tractor’s air circuits. The air dryer is maintenance free for the driver.
  • Page 82: Tyre Pressure Monitoring System Display, Tpms (Optional)

    Tyres subjected to excessive loads. Tyres that are not correctly inflated. Terberg provides tyres to meet standard specifications. Depending on the application and customer demands the actual tyre specification may vary from the standard. It is the customer's responsibility to ensure that tyres meet the working requirements of the tractor.
  • Page 83: Settings

    The tyre pressure should normally be 8 - 10 bar at nominal carrying capacity, depending on the tyre specification and load condition. However, many Terberg tractor applications require a higher tyre pressure than nominal due to load conditions.
  • Page 84 10300 3350 6000 10600 3450 6150 10900 3550 6300 11200 3650 6500 11500 3750 6700 11800 3875 6900 12150 4000 7100 12500 4125 7300 12850 4250 7500 13200 4375 7750 13600 TD2886-04EN - Page 84 of 101 Terberg Benschop 2022-08...
  • Page 85 1.12 1.08 1.15 1.10 1.25 1.13 1.35 1.17 1.50 1.21 1.65 1.25 1.80 1.30 2.10 1.40 2.50 1.40 D* = carrying capacity multiplication factor. L* = tyre pressure multiplication factor. TD2886-04EN - Page 85 of 101 Terberg Benschop 2022-08...
  • Page 86: Repair And Maintenance

    Repair and maintenance C A U T I O N The maintenance in this manual is for a daily operation only. For a more comprehensive service refer to the Terberg maintenance manual. Towing or pushing If you need to tow or push a tractor, always use a tow bar.
  • Page 87: Cabin Tilting

    The ignition key is ‘on’ if electric power is required during maintenance.  There are no persons or loose objects inside the cabin.  The cabin door is closed properly.  The windscreen washer reservoir is properly closed. TD2886-04EN - Page 87 of 101 Terberg Benschop 2022-08...
  • Page 88: Operating Components

    Electrical main switch for switching on and electrical Main switch consumers. Lever for change of direction when the cabin must be tilted or lowered. Lever  To tilt: turn lever clockwise.  To lower: turn lever anticlockwise. TD2886-04EN - Page 88 of 101 Terberg Benschop 2022-08...
  • Page 89: To Tilt The Cabin With The Hydraulic Hand Pump

    If the pressure in the cabin tilting system fails to increase after pumping, there might be a problem with air in the system or the lever for direction is not positioned correctly. TD2886-04EN - Page 89 of 101 Terberg Benschop 2022-08...
  • Page 90 When the cabin locks are not yet locked, the DIM will notice the driver by means of a tell-tale warning. Whenever the cabin is tilted back, but not locked properly, this tell-tale continues to alert the driver. TD2886-04EN - Page 90 of 101 Terberg Benschop 2022-08...
  • Page 91: To Turn The Cabin Backward

    To tilt the cabin halfway W A R N I N G Terberg strongly recommends that maintenance is carried out only when the cabin is fully tilted forward. However, some maintenance requires the cabin to be tilted halfway.
  • Page 92: To Tilt And To Lower The Cabin Electrically (Optional)

    Press switch (2), the cabin starts the tilt process. To lower the cabin electrically  Turn lever (1) in the down direction, anti-clockwise.  Press switch (2), the cabin will lower. TD2886-04EN - Page 92 of 101 Terberg Benschop 2022-08...
  • Page 93: Tractor Cleaning

    N O T I C E Minimum distance between the high-pressure nozzle and the washing surface:  Approximately 100 cm with a round, concentrated jet.  Approximately 50 cm with a flat, widespread jet. TD2886-04EN - Page 93 of 101 Terberg Benschop 2022-08...
  • Page 94: Cabin Washing

    First wash the Tractor in accordance with the above and allow it to dry. Then use a polishing agent or deep cleaning agent with only a small amount of abrasive components. TD2886-04EN - Page 94 of 101 Terberg Benschop 2022-08...
  • Page 95: Washing Upholstery

    Steel rims are often exposed to different types of dirt such as road dirt, oil, asphalt, tar and brake dust. To protect the rims from discolouration, oxidisation and unnecessary wear, regular maintenance is required. For additional protection a TD2886-04EN - Page 95 of 101 Terberg Benschop 2022-08...
  • Page 96: Changing Wiper Blades

    If the damage has not reached to the underlying metal and a damaged paint layer is still present, the paint can be applied directly after light scraping to remove any dirt. TD2886-04EN - Page 96 of 101 Terberg Benschop 2022-08...
  • Page 97: Underlying Metal Damaged

    OFF position manually. If one of the switches is set to the OFF position the engine is stopped and all the electronics are disconnected at once. TD2886-04EN - Page 97 of 101 Terberg Benschop 2022-08...
  • Page 98: Batteries

    (-) of the starter vehicle. The negative (-) lead should always be disconnected first and connected last, e.g. when changing a battery. This avoids the risk of short circuits. TD2886-04EN - Page 98 of 101 Terberg Benschop 2022-08...
  • Page 99: Fuses, Relays And Converter

    Upper dashboard/ Sw. Mirror Adj./Spare Switches (KL15). Electrical window (KL15). Heating control (KL15). Heating fan motor (KL15). ECU YTxx3 CC2 (KL30AR). ECU YTxx3 CC2 (KL30AR). ECU YTxx3 CC2 (KL30AR). Display (KL30AR). TD2886-04EN - Page 99 of 101 Terberg Benschop 2022-08...
  • Page 100: Relays And Converter

    Relay heating SCR hose 1. K04B Relay heating SCR hose 2. K04C Relay heating SCR hose 3. Relay beacon. Relay brake lights. K10CF Relay working light(s) cabin front. K10CR Relay working light(s) rear. Relay horn. TD2886-04EN - Page 100 of 101 Terberg Benschop 2022-08...
  • Page 101: Headlamp

    Headlamp The exchange of a light bulb can be done by a driver. For other, more complex repairs or replacements, the driver must contact the Terberg Service organization. Light bulb replacement Never touch the glass of a new light bulb with your bare hands as grease, acid, oil and other impurities can vaporize due to heat from the lamp and can damage the reflector.

Table of Contents

Save PDF