Advertisement
TROUBLESHOOTING
5. With the lid on and the terminals connected correctly,
switch the Powered Battery Box to ON (RESET) using
the 16 Amp resettable circuit breaker switch.
6. If the digital voltmeter lights up and displays the
battery's voltage, you can now secure the lid.
7. To secure the lid, please install the two plastic brackets
with supplied bolts and nuts first. Thread the tie down
strap around the box through the two installed plastic
brackets. Fasten and secure firmly by adjusting the
plastic buckle.
8. You are now free to plug in your devices to power
them up with your Powered Battery box.
+ If no power is being received through the accessory or USB sockets, switch the 16 Amp
resettable circuit breaker switch reset off and on again.
+ If no power is being received through the 50 Amp connectors, check the internal fuses
circled below for fault and replace if necessary.
+ Ensure battery is recharged every 3 months or after each use, to maintain full charge
and prolong battery life.
+ The battery MUST be recharged when voltage is low.
+ Suitable for low current accessories only.
+ Not suitable for starting battery application.
+ Not suitable for marine use.
Advertisement
