newell D-TAP Operating Manual

D-TAP POWER ADAPTER
OPERATING MANUAL
Before using the product, please read the following instructions carefully
and keep them for future use. When transferring the product to a third party,
it is advisable to include the instructions with the product.
1. SAFETY INSTRUCTIONS
Improper handling of the power supply may cause undesirable
consequences of equipment damage or injury. To avoid them,
please observe the following notes.
1. Do not self-repair, disassemble or modify.
2. Do not expose to water or other sources of moisture.
3. Do not expose to high temperatures.
4. Do not use liquid or aerosol cleaners.
5. Keep out of reach of children.
6. Do not use the adapter if it is damaged.
7. Take the used equipment to a suitable waste collection point,
do not put it together with other municipal waste.
2. PRODUCT DESCRIPTION
The Newell power adapter is designed for use with
V-mount batteries.
On one side, the adapter is equipped with a dummy battery
to be inserted into the camera's battery compartment.
On the other side, the adapter plug should be inserted into
the D-Tap socket of the battery pack. The length of the spiral
cable is 50cm.
*The manufacturer reserves the right to change the information
contained in this manual without prior notice.
3. WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical
and electronic, batteries and packagings must not be placed
with other household waste.They must be handed over
to a separate waste collection system.
4. WARRANTY
Newell products are
covered by a 40-month
manufacturer's warranty.
Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabriqué
en Chine, Vyrobeno v Číně, Wyprodukowano w Chinach, Cделано в Китае
PHOTO
ACCESSORY