Change The Phone Covers; Create Custom - Nokia 3220 User Manual

• Change the phone covers

Note: Before removing the
cover, always switch off the
power and disconnect the
charger and any other device.
Avoid touching electronic
components while changing
the covers. Always store and use
the device with the covers attached.
1 Remove the back cover from the
phone as described in "Remove the
back cover and battery" on page 7.
2 Beginning at the top of the phone (1),
gently pull the front cover away from
the phone and detach it (2).
3 To remove the key mat from the front
cover, take it out gently.
4 Place the key mat in the new front
cover (3).
5 To replace the front cover, press it
gently onto the phone until it snaps
into position (4).
6 Align the top of the back cover with
the top of the phone (5), and press
the bottom of the back cover to lock it (6).
• Create custom back cover
Note: Use normal, plain paper as found in standard printers or use a
photo print that is not thicker than 0.3 mm. To avoid affecting the
antenna performance the material must not contain metal particles.
Use the plastic stencil to
create a cut-out cover
using your own design.
1 Place the stencil in
the correct position
and draw the
outline (1).
2 Carefully cut out your
new cover (2).
12 Copyright © 2004 Nokia