Advertisement
Quick Links
Advertisement
Summary of Contents for ICARVISIONS JA-MC818
- Page 1 摄像头安装指导 Vehicle-Camera JA-MC818 Install specification...
- Page 2 摄像头安装指导 Please contact the manufacturer at any time due to the difference between the various models or the upgrade of the system software. The contents of this installation guide will be updated from time to time without notice. 一、Camera installation steps Installation tools and auxiliary materials: Adhesive 3M Sticker...
- Page 3 摄像头安装指导 2、 Use adhesive Make sure the camera paste surface is dry, and bring a one-time dining plastic gloves, the adhesive will be prepared evenly coated on the camera paste surface. Wait for about 10 seconds and pay attention to the glue without too much to avoid overflow waste.
- Page 4 摄像头安装指导 3、 Use 3M sticker Make 3M stickers and camera pasted and fixed tight, and press for 30 seconds. 4、 Install the camera to the front glass...
- Page 5 摄像头安装指导 First use the wipes to make the glass clean and dry, and then paint with a layer of adhesive, after about 10 seconds stick 3M stickers, press 30 seconds. Finally, make camera forced on the glass (slowly press on the glass on one side to avoid the formation of blisters), press 20-30 seconds without moving, after 20-30 seconds, the camera will firmly erect on the glass.
- Page 6 摄像头安装指导...
Need help?
Do you have a question about the JA-MC818 and is the answer not in the manual?
Questions and answers