Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Wuhan Hi-Cloud Technology TLS360
- Page 1 TLS360 3D Laser Scanner Product Manual Wuhan Hi-Cloud Technology Co.,Ltd.
- Page 3 Statement Copyright The copyright of this manual belongs to Wuhan Hi-Cloud Technology Co., Ltd. and all rights are reserved. Without written permission, no company or individual may disclose, reprint or otherwise distribute any part of this document to a third party. Otherwise, they will be investigated for legal responsibility.
- Page 4 Manual Content The manual mainly discusses how to install and use the hardware equipment of HD TLS360 3D laser measurement system (hereinafter referred to as HD TLS360 system). Organization This document mainly consists of the following parts:...
- Page 5 Prompt the user to pay special attention during the installation or use of HD TLS360 system Represents additional descriptive information provided to the user Reference Documents The reference documents involved in the use of HD TLS360 system include: <<HD TLS360...
-
Page 6: Table Of Contents
ARBON IBER RIPOD 3 EQUIPMENT INSTALLATION & DISASSEMBLY ........8 3.1 P ............. 8 REPARATION BEFORE NSTALLATION 3.2 HD TLS360 S ..... 9 YSTEM QUIPMENT NSTALLATION AND ISASSEMBLY 3.2.1 Battery Installation ................. 10 3.2.2 Battery Disassembly ................11 3.2.3 Camera Installation ................11 3.2.4 Camera Disassembly ................ - Page 7 6.1 C ................25 OMMON AULT IAGNOSIS 6.2 P ..............25 RECAUTIONS FOR EQUIPMENT USE READER FEEDBACK ..................26...
-
Page 9: Product Overview
1 Product Overview 1.1 Product Introduction HD TLS360 is a portable 3D laser measurement system independently developed by Wuhan Hi-Cloud Technology Co., Ltd. It takes lightweight and humanization as the design concept, integrates multi-line LiDAR, image acquisition, GNSS and other technologies, and integrates high-precision laser scanner, angle measuring instrument and other sensors. -
Page 10: Main Technical Parameters Of The Product
1.2 Main technical parameters of the product The main technical parameters of HD TLS360 laser measurement system are shown in the table below: Table 1-1 Main technical parameters of HD TLS360 Index Item Index parameters Maximum Ranging 150m Minimum Ranging 0.2m... -
Page 11: Product Hardware Composition
HD TLS360 system is mainly composed of host, battery, power line and data line, battery compartment, panoramic camera assembly, RTK fixed assembly, carbon fiber tripod, etc. 2.1 Host The host and interface of HD TLS360 system are shown in the figure below. System status indicator Data interface Memory card interface... -
Page 12: Battery
2.2 Battery HD TLS360 system is powered by lithium battery, as shown in the figure below. Power button Figure 2-2 HD TLS360 system lithium battery Warning: 1. It is forbidden to immerse the battery in liquid (such as water, seawater, etc.), and the battery should be placed in a cool and dry environment when not in use;... -
Page 13: 2Battery Off
2 seconds to turn off the battery. After the battery is turned off, the indicator lights are off. 2.3 Power cable & Data cable HD TLS360 system is equipped with 1 power cable and 2 data cables, as shown in the figure below. Figure 2-3.1 Power cable Figure 2-3.2 Network cable... -
Page 14: Battery Compartment
2. Connect cable gently to prevent excessive force from damaging the equipment. 2.4 Battery Compartment HD TLS360 system is equipped with external battery compartment, as shown in the figure below. Mounting Slider Power Port Figure 2-4 HD TLS360 system battery compartment... -
Page 15: Panoramic Camera Component
Figure 2-5 HD TLS360 system panoramic camera component 2.6 RTK Fix Component HD TLS360 system is equipped with RTK fix components, as shown in the figure below. Figure 2-6 HD TLS360 system RTK fix component... -
Page 16: Carbon Fiber Tripod
2.7 Carbon Fiber Tripod HD TLS360 system is equipped with carbon fiber tripod, as shown in the figure below. Figure 2-7 HD TLS360 system carbon fiber tripod 3 Equipment Installation & Disassembly 3.1 Preparation before Installation Before installing HD TLS360 system, please check whether the equipment is complete according to the equipment packing list. -
Page 17: Hd Tls360 System Equipment Installation And Disassembly
3.2 HD TLS360 System Equipment Installation and Disassembly Warning: 1. When installing HD TLS360 system equipment, please handle it carefully to protect the equipment; 2. When installing or disassembling a power supply device, ensure that the power supply device is turned off to avoid damage to the device when it is powered on. -
Page 18: Battery Installation
Please ensure that the battery is turned off according to the steps described in section 2.2.2. Install the battery into the battery compartment of HD TLS360 system in the direction shown by the arrow in the figure below, and gently push it inward until the buckle is fastened. -
Page 19: Battery Disassembly
3.2.2 Battery Disassembly Ensure that the HD TLS360 system host is turned off and turn off the battery power. Press the clips on both sides of the battery and pull the battery out of the battery compartment in the direction of the arrow. -
Page 20: Camera Disassembly
3.2.4 Camera Disassembly Ensure that the HD TLS360 system host is turned off. Loosen the screws on both sides of the camera component by hand, and take out the camera component in the direction shown in the figure. -
Page 21: Rtk Installation
3.2.5 RTK Installation Ensure that the HD TLS360 system host is turned off. Install the RTK components on the top of the host in the direction shown in the figure, and tighten the screws on both sides by hand. -
Page 22: Rtk Disassembly
3.2.6 RTK Disassembly Ensure that the HD TLS360 system host is turned off. Loosen the screws on both sides of RTK component by hand, and take out the RTK component in the direction shown in the figure. -
Page 23: Battery Compartment Installation
"click". Click Figure 3-2.7 Installation diagram of HD TLS360 battery compartment 3.2.8 Battery Compartment Disassembly Gently push the bottom of the battery compartment in the direction of the arrow in the figure below to push the battery compartment out of the carbon fiber tripod battery compartment chute. -
Page 24: Host Installation
3.2.9 Host Installation Ensure that the HD TLS360 system host is turned off. Place the host on the top of the carbon fiber tripod, roughly align the center hole at the bottom of the host with the center hole of the tripod fixing platform, and then tighten the hand screw nut at the bottom of the tripod fixing platform to fix the host with the carbon fiber tripod. -
Page 25: Host Disassembly
3.2.10 Host Disassembly Ensure that the HD TLS360 system host is turned off and unplug the external cable of the host. Loosen the hand screw nut at the bottom of the carbon fiber tripod fixing platform by hand, remove the host with both hands and place it in the packing box or other safe position. -
Page 26: Equipment Operation
Section 3.2, the HD TLS360 system equipment can be used; 2. According to the steps described in Section 2.2.1, turn on the battery, wait for two seconds, and then press the power button of the HD TLS360. The indicator light is on and the equipment is started;... -
Page 27: Wireless Connection
1. Use your mobile phone or computer to search for WiFi hotspots and find a WiFi access point named "HD TLS360"; 2. Use password "12345678" to join the HD TLS360 hotspot, and set the Wi-Fi IP obtaining mode to automatically obtain IP. -
Page 28: Host Shutdown
Figure 4-4; Turn Off Device Figure 4-4Turn off the device 2.After the HD TLS360 host status indicator is off, power off the battery complete the shutdown of the device host. Warning: To prevent device damage, do not power off the host before it... -
Page 29: Battery Charging
4.5 Battery Charging The lithium battery of HD TLS360 system equipment is charged with a special charger, as shown in Figure 4-5. Figure 4-5 HD TLS360 charger Notice: 1. -
Page 30: Data Copy
5.1 Point Cloud Data Copy 1. Power on the HD TLS360 host; Use a network cable to connect the LAN port of the HD TLS360 host to the computer network port. Set the IP address of the computer network port by according to the steps described in Section 4.3.2. - Page 31 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Page 32 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
-
Page 33: Appendix
6. Appendix 6.1 Common Fault Diagnosis 6.2 Precautions for equipment use In order to ensure the service life of the equipment and the accuracy of data acquisition, the following items need to be paid attention to when using the equipment: ... - Page 34 Reader Feedback Dear Clients: Thank you for your support and care for the products of Wuhan Hi-Cloud Technology Co., Ltd. Although we have conducted strict tests on the equipment, there may be some errors that have not been found. If you find any errors or defects in the process of using the equipment, please inform us in time.
Need help?
Do you have a question about the TLS360 and is the answer not in the manual?
Questions and answers