Advertisement
Quick Links
Advertisement
Summary of Contents for Lightsense DrugDetect-M1
- Page 1 DrugDetect-M1 ® Methamphetamine Scanner OPERATING MANUAL Lightsense Technology, Inc. 9420 E. Golf Links Rd., Ste 108/PMB179 Tucson, AZ 85730 Ph: 888 736-7349 www.lightsensetechnology.com techsupport@lightsensetechnology.com (Version July 2020) Designed and Manufactured in the USA...
- Page 2 M1-I model: Preparing and Measuring Samples with the Building Inspector DrugDetectM1-I for related information to operate that particular unit. This manual describes the operation of DrugDetect-M1 for Law Enforcement. © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
-
Page 3: Display Indicators
Charging with USB Fades: off-on-off until charged. (Then full on (plugged in) when charging complete) Charging complete, USB Off, when unit is off, removed and unplugged (charger unplugged) unit is POWERED OFF © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide. - Page 4 Information is stored in the unit’s internal computer memory, allowing software updates, diagnostics, data event storage, and date/time stamping for a permanent © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 5 The USB cable that is included interfaces DrugDetect-M1 to a PC and provides comma delimited data for event/data logging, report generation, and printout. Note that complete instrument diagnostics are performed prior to and immediately following a logged event so that proper device operation verification is logged with the data.
- Page 6 SCANNER ORIENTATION Back of Scanner SCAN CHG/DATA STATUS SCANNING TRACE POSITIVE PWR ON/OFF Front of Scanner Illuminator Receiver UV Transmitter Illuminator © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 7 Mechanical Specifications Size 0.625 inches (H) x 3 inches (W) x 6 inches (L) (1.6 cm x 7.7 cm x 15.4 cm) Weight 13 oz. (370 g) Case color Black © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
-
Page 8: System Start-Up
[Refer to the scanner layout figures for locations of the various functions and indicators.] 1. Remove the DrugDetect-M1 scanner from its supplied protective case. 2. The device is charged for immediate usage. 3. Do not turn the scanner power on if the SCAN button is depressed. - Page 9 USB connector. (The low battery indicator will beep twice before the unit shuts itself off.) Upon POWER-UP of the device, the rear panel LEDs and beeper indicate the following: © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 10 LEDs will illuminate. Some practice may be required to become comfortable with the sensitive detection range, but the scanning speed can be relatively fast (as mentioned above) while searching for this sensitive range or a more signal rich area. © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
-
Page 11: Troubleshooting
• Press the DrugDetect-M1 POWER switch once to turn on the unit. • Wait for the PC to recognize the DrugDetect-M1 connection. • The PC will recognize the DrugDetect-M1 internal memory and will associate it with Microsoft Excel or another spreadsheet application. -
Page 12: General Care
GENERAL CARE • Do not store electronic devices or other objects on top of the DrugDetect-M1 ® device. • Store in a cool, dry place and never leave the unit exposed to direct sunlight for long periods. DRUGDETECT-M1 PACKAGE CONTENTS ®... - Page 13 (and go back on, and blink at 1 Hz when unit is turned back on). Charging a fully discharged battery will require approximately ~4-5 hours. It is normal for the DrugDetect-M1’s case to become warm when charging the battery. © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 14 Procedure (below). Also, see warranty certificate below. One-Year Warranty Exception If you purchased the DrugDetect-M1 through a special buying program, such as a state purchase contract, etc., the above warranty may not apply. Please refer to the buying program contract for the appropriate warranty terms or contact Lightsense Technology, Inc.
- Page 15 © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 16 Lightsense will charge the customer for any shipping charges above the initial $25. If you want to ship your package express or next day air, Lightsense will invoice you for these freight charges.
- Page 17 If your DrugDetect-M1 is out of warranty and you would like to know the cost of repairs prior to the actual repair work being performed, Lightsense will provide a repair estimate. Nominal charges include $170 US per hour for labor or a flat fee of $500 US for nominal service, depending on the nature of the repair.
- Page 18 NOTES © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 19 NOTES © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
- Page 20 DrugDetect-M1 ® Methamphetamine Scanner Lightsense Technology, Inc 9420 E. Golf Links Rd., Ste 108/PMB179 Tucson, AZ 85730 Ph: 888 736-7349 www.lightsensetechnology.com techsupport@lightsensetechnology.com Designed and Manufactured in the USA © Copyright 2020, Lightsense Technology, Inc. All rights reserved, worldwide.
Need help?
Do you have a question about the DrugDetect-M1 and is the answer not in the manual?
Questions and answers