Advertisement
Quick Links
Advertisement
Summary of Contents for ENDURO EBIKE e-RUNNER
- Page 1 Enduro-ebike.com +14078157515...
- Page 2 +140.781.575.15 e-RUNNER USER MANUAL 2022 e-RUNNER USER MANUAL...
- Page 3 +140.781.575.15 Dear Customer, You are reading the assembly and operation manual for the Enduro Ebike. It contains all the important technical questions and details. If you have any questions, please contact us. Enjoy your e-RUNNER! Sincerely yours, Enduro-ebike team.
- Page 4 +140.781.575.15 1.1. Bicycle assembly a. Please, install the front fork b. Install the stem and handlebars e-RUNNER USER MANUAL...
- Page 5 +140.781.575.15 c. Install the front wheel d. Connect the battery wires e. Turn on the bike, check the display and lights e-RUNNER USER MANUAL...
- Page 6 Push the KEY IGNITION / ENGINE START/STOP button on the bike / use the supplied remote control. The remote control has the following buttons: Search: Your bike makes a beep sound. Turn ON / OFF the motor power. Unlock: Deactivate the alarm. Lock: Activate the alarm. e-RUNNER USER MANUAL...
- Page 7 PAS (Pedal Assist System): the motor turns on automatically during the rotation of the pedals. The throttle knob is not active. Throttle: the engine operation is controlled only by the throttle knob. The throttle knob used to add or reduce speed. 1.8. Information display 2. BIKE BASICS e-RUNNER USER MANUAL...
-
Page 8: Intended Use
While riding the bike on a steep hill or a long hill, help your bike with the pedals, that will increase battery charge and prevent the motor from overheating and power loss. Enduro e-bike is not liable if the e-RUNNER bike is used against its original purpose or for damages resulting from a breach of important instructions in this manual. - Page 9 +140.781.575.15 4. e-RUNNER CONTROL 4.1. After turning on the e-bike, be sure to check the battery charge level. The battery charge can be conveniently controlled by using the charge indicator on the display. 4.2. Start the movement with the pedals or simply pushing your feet off the ground, and then activate the electric drive - by doing this you will significantly (by 15-25%) increase the mileage between the recharges, since it is at the start that the bicycle with the engine consumes the most electricity/energy.
-
Page 10: Battery Instruction
The recommended storage time for an unused lithium-ion battery before the next recharge should not exceed 60 days; 7.11. For long-term storage, it is recommended to charge the e-RUNNER battery every 60 days, the charging time is 2-3 hours; 7.12. Keep the battery away from heat sources and open flames;... - Page 11 Check that the pressure in the tires is within the recommended limits (as a rule, the value is indicated on the tire). Check the rim for damage. Check spoke tension. Attention! Damaged components should be repaired or replaced immediately. e-RUNNER USER MANUAL...
- Page 12 +140.781.575.15 10. e-RUNNER WARRANTY CONDITIONS 10.1. e-RUNNER warranty period The warranty period for defects in workmanship or components is: 12 months for: 1 months for: Battery Pack Electrical/electronic components ▪ ▪ 6 months for: Brake system ▪ Motor Handlebar ▪...
Need help?
Do you have a question about the e-RUNNER and is the answer not in the manual?
Questions and answers