Table of Contents
Summary of Contents for TENLOG TL-D5
- Page 1 TL-D5 IDEX 3D Printer Manual Warm.Fit Learn More This manual is for reference only. The structure and parts list of the TENLOG 3D printer are subject to the actual product in the carton, and subject to change without notice.
- Page 2 Parts List Printer Host Z/X Gantry Assembly Dual Extruder & Nozzle Kits Z-axis Cable-Stayed kit Tool Box 1 Tool Box 2 5x M5 Spring Washer 2.5mm 1.5mm Allen Wrench 5x M5*25 Screw 9x M3*16 Screw Test Filament Test Filament Metal Scraper Black Cable Tie 5x M4 T-nut SD Card...
- Page 3 Safety Alert How to Assemble Assemble Z/X Gantry Assembly to the Printer Host Minors are not allowed Do not plug or unplug to use alone under power NO HOT PLUG Assemble Dual Extruder & Nozzle Kits Double check voltage before Do not touch hot nozzle first use and hot bed...
- Page 4 Wiring...
- Page 5 How to Use Touch Screen Click on Tool button, you can get: Semi-automatic Leveling Preheat PLA ABS 0/23 Filaments Reload Tools Printing from any Height etc. Nozzle 1 Leveling Leveling Cooling Temp Back Back Leveling Cooling Temp Dual Material Print SD Tools Setting Reload...
- Page 6 Cura Interface Overview How to Use How to Level Scan Code to Watch How to Set Nozzle Offset Open file. Opens a 3D file. Printer selection panel. Displays the selected printer. Configuration panel. Contains the material and print core setup. How to Use Stages.
Need help?
Do you have a question about the TL-D5 and is the answer not in the manual?
Questions and answers