Table of Contents
Advertisement
9 - tighten the lock nut with Allen key type "B" checking the
values listed in table 2.
10 - adjust, if necessary, the pitch of the propeller.
(see section 7)
11 - install on the propeller the bronze ring (Allen key type "C")
and the zinc anode (Allen key type "B").
Fixing the anode on the propeller is the last step of the
installation. The anode is necessary to protect the propeller from
damage due to electrolytic corrosion. A regular check and
replacement of the anode helps to maintain the propeller in the
best possible shape.
10
controdado
l
ock nut
Advertisement
Table of Contents
