Advertisement
Quick Links
User must supply hardware to mount:
• Strike Plate: (6) 1/4" hex screws
• Latch: (4) 1/4" flat head screws
• Latch Cover: (4) #10 screws with T27 type tamper-resistant
torx drive
Note: Retrofit kit available for through bolting when no structure
exists in the door or jamb to securely attach components.
Note: The 0058 Latch requires one of the following Inside Releases:
0481C, 0481SC, 0482C, 0486C, 0487C, 0488C, 0489C
STEP 1
Install 0058E latch on spacer plate and mount to door making
sure it is flush with the edge of the door.
STEP 2
• Center strike plate on 0058E latch
• Mark center of 4 slots
• Install (4) 1/4" mounting screws (not included)
Note: Do not fully tighten screws in slots and adjust plate
to approx. 1-3/16" for initial setup
© 2023 Kason Industries, Inc. IS-0058E 0223
INSTALLATION INSTRUCTIONS
0058E Security Latch with Electric Flush Strike
kasonind.com | 1.800.935.2766 | PAGE 1
Part Number: 10058E*
Advertisement
Related Manuals for Kason 10058E Series
Summary of Contents for Kason 10058E Series
- Page 1 • Mark center of 4 slots • Install (4) 1/4” mounting screws (not included) Note: Do not fully tighten screws in slots and adjust plate to approx. 1-3/16” for initial setup kasonind.com | 1.800.935.2766 | PAGE 1 © 2023 Kason Industries, Inc. IS-0058E 0223...
- Page 2 #6-32 x 3/8” screws provided. STEP 5 • Install HID card reader to top cover assembly Note: Non-Kason HID card readers may be purchased separately and installed • Wire card reader and electric strike per mfg. requirements •...
- Page 3 • Install latch cover and secure to the door using tamper resistant screws (not provided) STEP 7 • Check for proper function of latch, door, lock, and inside release • Install safety decal kasonind.com | 1.800.935.2766 | PAGE 3 © 2023 Kason Industries, Inc. IS-0058E 0223...