Table of Contents
Advertisement
4. How to Install the Remote Control Unit
I Wireless Remote Control Unit
The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly,
do not install the remote control unit in the following
places:
G In direct sunlight
G Behind a curtain or other place where it is covered
G More than 26 ft. away from the air conditioner
G In the path of the air conditioner's airstream
G Where it may become extremely hot or cold
G Where it may be subject to electrical or magnetic
interference
4-1. Mounting on a Wall
(a)
Removable mounting
(1) Momentarily hold the remote control unit at
the desired mounting position.
(2) Confirm that the air conditioner responds
correctly when you press buttons on the
remote control from that position.
(3) After confirming correct operation, use a
screwdriver to screw the supplied special
mounting screw into the wall. (Fig. 4-1)
(4) Hang the remote control unit from the
mounting screw.
(b)
Non-removable mounting
(1) Momentarily hold the remote control unit in
the desired mounting position.
(2) Confirm that the air conditioner responds
correctly when you press buttons on the
remote control from that position.
(3) After confirming correct operation, use a
screwdriver to screw the mounting screw
into the wall. (Fig. 4-1)
(4) Remove the remote control lid by sliding it
downward.
(5) Remove the batteries of the remote control
unit.
(6) Hang the remote control unit from the
mounting screw, and use a screwdriver to
screw the remote control unit securing
screw into the wall through the hole in the
battery compartment. (Fig. 4-2)
(7) Replace the batteries.
(8) Again confirm that the remote control unit
operates correctly.
Removable mounting
Non-removable mounting
Screw
(Packed in the indoor unit)
32
S4179705
Wall
Special
mounting
screw
(Packed in the indoor unit)
1099_M_I
Fig. 4-1
Wall
1100_M_I
Fig. 4-2
Advertisement
Table of Contents
