Subscribe to Our Youtube Channel
Summary of Contents for Benelec BWI900
- Page 1 PART NO: 01191Q2 BWI900 WIRELESS INTERCOM USER MANUAL BENELEC.COM.AU Benelec Pty Ltd. 17 Byrnes St, Botany NSW 2019, Australia, +61-2-8397-3333, +61-2-9700-1231, reception@benelec.com.au...
-
Page 2: General Information
Super dynamic range of Active Noise Cancellation greater than 95dB Max Talk range between devices is 0.62mile / 1.0Km typical for the BWI900 terminals in free space (Please note: vehicles and buildings will reduce this expected range). -
Page 3: Controls And Indicators
3.5mm headset contact Antenna Detachable antenna USB Jack USB port for firmware upgrade and battery recharge Drop in charge Contact Drop in charge contact for recharging battery BENELEC.COM.AU Benelec Pty Ltd. 17 Byrnes St, Botany NSW 2019, Australia, +61-2-8397-3333, +61-2-9700-1231, reception@benelec.com.au... - Page 4 Group number you selected. All equipment/belt packs must have the same Group number to communicate with each other within the group. 24 separate channels/Groups are available for the BWI900. 3.4 ID selection In a group, each BWI900 terminal needs to have a unique ID per device from "00"...
- Page 5 “SEC CODE” is displayed in “Setting Mode”. 5.SEC CODE 0000 The security code consists of four digits and it is available for you to select “1”~”9”, “A”, BENELEC.COM.AU Benelec Pty Ltd. 17 Byrnes St, Botany NSW 2019, Australia, +61-2-8397-3333, +61-2-9700-1231, reception@benelec.com.au...
- Page 6 3.8 Operation Mode Selection – Full or Half Duplex Operation The BWI900 terminal provides the option to operate the terminal in either Full Duplex mode (hands free – No PTT Required) or Half Duplex (PTT Mode – PTT button on the front of the terminal required to transmit audio).
Need help?
Do you have a question about the BWI900 and is the answer not in the manual?
Questions and answers