Assured AUTOMOTIVE Bull Horn ACHRKS-444 Install

Assured Performance Bull Horn Install – PN: ACHRKS-444r
 Mount horn on vehicle in a location where is is best protected from water, mud, snow,
etc.
 Mount Bull Horn to a secure spot on vehicle with trumpet opening facing sideways or
down. This will help any contaminants that enter the trumpet to fall or drain out.
 If possible mount the horn to a metal and grounded location. Inner fender wall works
best.
 The mounting bracket on horn is the ground (negative). If horn is NOT mounted to a
grounded location, install a ground wire from mount bracket to a ground.
 Use the included Bolt, Fender Washer, Lock Washer and Nut.
 You can use the 12v Positive OE Vehicle horn switch (steering wheel switch) or you can
corporate a 12v momentary switch (not included) between positive source and positive
horn lead.
 When using a separate momentary switch, be sure to incorporate a 5 amp inline fuse.
 For 12v Positive wiring, use at least 12 gauge automotive wiring.
 Use of a relay is not required for this product, but can be used.

Mounting of Horn

Wiring of Horn