Summary of Contents for PowerGistics 1T1216TRM0
- Page 1 STAND TOWER RETRO MOUNT INSTALLATION GUIDE Model # 1T1216TRM0 for Tower12 or Tower16 pre-2017 Model # 1T1820TRM0 for Tower18 or Tower20 pre-2017...
- Page 2 Failure to read these warnings or to follow the instructions below could result in personal injury or damage to your product that could void its warranty. • DO NOT PLUG POWERGISTICS TOWERS INTO OTHER TOWERS. MUST BE PLUGGED DIRECTLY INTO THE WALL OUTLET.
- Page 3 Two separate spine adapters fit between one of the contemporary Just-A-Stands or Stand on any Adapter Kit includes: older Tower. - stand adapter bars - hex wrench - nuts - carriage bolts - socket head screws...
- Page 4 1. Insert hex-head bolts to the Tower spine. NOTE: Leave screws sticking out for the adapters to go on. 201-389-9940 | www.PowerGistics.com...
- Page 5 2. Position the stand adapters to the socket head screws.
- Page 6 3. Tighten the socket head screws. Use either method to tighten socket head screws. 201-389-9940 | www.PowerGistics.com...
- Page 7 4. Place the Tower on the adapters. Line up the holes in the Tower spine with the hole slot on the adapters. 5. Insert the carriage bolts and tighten with the nuts.
- Page 8 201-389-9940 | www.PowerGistics.com...
- Page 10 Check out our installation videos at Vea nuestros videos de instalación en Se vores installationsvideoer på Découvrez nos vidéos d’installation sur https://powergistics.com/tower-series-install-videos/ 100 Continental Drive, Columbus, Wisconsin 53925 USA 201-389-9940 | www.PowerGistics.com PWRG 1157 Tower Stand Adapter INSTALL GUIDE 2023...
Need help?
Do you have a question about the 1T1216TRM0 and is the answer not in the manual?
Questions and answers