Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ibis OSO
- Page 1 BATTERY MOUNT ADJUSTMENT GUIDE...
- Page 2 OSO | BATTERY MOUNT INSTALLATION GUIDE TOOLS REQUIRED • T20, T30 Torx key • 2.5mm, 3mm, 4mm and 6mm Allen keys • Torque Wrench with T20, T30, 4mm and 6mm Allen bits • Rag...
- Page 3 OSO | BATTERY MOUNT INSTALLATION GUIDE PROCEDURE STEP 1 • Remove the battery door and the battery. STEP 2 • Use a T20 key to ensure the bolts holding the lower battery cradle to the lower battery mount are tight. Torque: 2Nm...
- Page 4 OSO | BATTERY MOUNT INSTALLATION GUIDE STEP 4 • Remove the downtube guard and motor cover. • Loosen the two bolts which hold the lower battery cradle. Depending on which bolts you have it may require either a 4mm, 5mm, or T30 Torx key.
- Page 5 OSO | BATTERY MOUNT INSTALLATION GUIDE STEP 5 • Use a long 6 or 8mm Allen key to apply moderate pressure on the center of the back of the battery cradle. • Installation torque depends on which bolts your bike is equipped with. Tighten bolts with a 4mm Allen bolt head to 12Nm and bolts with a T30 Torx or 5mm Allen bolt head to 15Nm.
- Page 6 OSO | BATTERY MOUNT INSTALLATION GUIDE STEP 7 • Visually inspect the interface between the battery cradle and the battery to ensure the foam contacts the battery. No Gap STEP 8 • Turn on the bike to ensure it functions.
- Page 7 IBIS CYCLES | 1201 SHAFFER ROAD, BUILDING 1B | SANTA CRUZ, CA 95060 | IBISCYCLES.COM...
Need help?
Do you have a question about the OSO and is the answer not in the manual?
Questions and answers