Advertisement
Model 13
Fully rear fastening harness designed for those passengers with challenging behaviour or learning difficulties.
offering postural support & assists in seating the occupant in an upright sitting position.
This harness can be used on some wheelchairs and easy chairs but when used in vehicles will only fit single seats with
easy access around the back rest of the seat & underneath the base of the seat cushion. i.e. people carriers, mini-buses
or the front passenger seat.
It will not fit the back seat of a standard hatch back car!
IMPORTANT: This harness is not classed as a safety harness.
The vehicle safety belt MUST be worn over the top of our harness unless they are exempt for medical reasons.
The combination on the existing safety belt & the secondary harness offers added security for the passenger.
Available in two sizes:
Up to 6 years - Cat. Ref: 13J (for three Steel Safety Buckle please quote 13J/STEEL3)
7 years to Adult - Cat. Ref: 13H (for three Steel Safety Buckle please quote 13H/STEEL3)
Steel Safety Buckle
Side Press Release Buckle
For those passengers who can unfasten 'Press Release' buckles
Steel Safety Buckle
or there are other passengers on the vehicle that will release
Children & adults with Learning difficulties or Autism
these buckles, please choose the Model 13 H Steel 3 harness fitted
find this buckle too complicated to open.
with three 'Steel Safety Buckles'.
13J/STEEL3 (up to 6 yrs)
13H/STEEL3 (7yrs-adult)
We strongly recommend that a 'Seat Belt Cutter' is kept in the
vehicle when using a harness fitted with the Steel Safety Buckle.
Crelling Harnesses For Disabled Ltd.
12 Crescent East, Thornton-Cleveleys, Lancashire, FY5 3LJ
Tel: 01253 852298 Fax: 01253 821780
Email:
info@crelling.com
Website:
www.crelling.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crelling Harness 13
Summary of Contents for Crelling Harness 13
- Page 1 Children & adults with Learning difficulties or Autism these buckles, please choose the Model 13 H Steel 3 harness fitted find this buckle too complicated to open. with three ‘Steel Safety Buckles’.
- Page 2 This helps to raise the child to the correct height for wearing the vehicle safety belt. For current laws and guidelines please visit: www.rospa.com www.childcarseats.org.uk Remember: The Model 13 must be fitted in conjunction with the existing vehicle safety belt.
- Page 3 This buckle has proven extremely successful when fitted to our harnesses as an alternative to the standard ‘quick release’ buckle. It helps prevent those passengers with inquisitive fingers, challenging behaviour or learning difficulties from releasing the harness buckle. The buckle operates in reverse to the standard vehicle buckles as it is opened by raising a spring loaded lever or over-catch and will not press release.
- Page 4 Model 13 Fitting Instructions Place the PVC chest pad against the patient’s chest. Pass both horizontal fixing straps around the patient and fasten straps behind the seat back. The lower strap at waist level and the top strap at chest level to hold the patient securely in an upright sitting position.
Need help?
Do you have a question about the 13 and is the answer not in the manual?
Questions and answers