Advertisement
Quick Links
www.c-racer.com
CONTENTS
1. 1pcs metal base
2. 2pcs screws M5X10 (allen-oval-washers)
3. 1pcs screw M5X20 (allen-oval-washer)
4. 1pcs adapter Φ12ΦΦ8Φ8mm
The product is for race use only
For any further information please do not hesitate to contact us:
Tel.: +30 2108075387 Email:
INSTRUCTION
Model
ΥΑΜΑΗΑ Tenere 700/T7
info@c-racer.com
Page 1/3
Product
CHAIN GUARD in SILVER & BLACK color
These are the parts you will find inside the package
Read the instructions before starting the installation.
Unscrew the 2 screws holding the guard on the front and
inside the scissor.
Then remove the screw that is visible from the outside, as shown
on the photograph.
Code
NP-YT7-S & NP-YT7-b
Advertisement
Summary of Contents for C-RACER NP-YT7-S
- Page 1 INSTRUCTION Page 1/3 Product Code Model ΥΑΜΑΗΑ Tenere 700/T7 CHAIN GUARD in SILVER & BLACK color NP-YT7-S & NP-YT7-b www.c-racer.com CONTENTS 1. 1pcs metal base 2. 2pcs screws M5X10 (allen-oval-washers) 3. 1pcs screw M5X20 (allen-oval-washer) 4. 1pcs adapter Φ12ΦΦ8Φ8mm The product is for race use only For any further information please do not hesitate to contact us: Tel.: +30 2108075387 Email:...
- Page 2 Page 2/3 Remove the metal base that the protector has on the front part. Screw it onto the new guard, but do not tighten the screws. Slide the protector into place and screw it on back screw without tightening it. Be sure to place the adapter on the inside of the protector as shown in the photo.
- Page 3 Page 3/3 Finally tighten the screws from the top of the base and the external. This will be your final result. Enjoy your rides!