Download Print this page
PEACOCK CIRRUS Installation Manual

PEACOCK CIRRUS Installation Manual

Advertisement

Quick Links

IMPORTANT SAFETY PRECAUTIONS
Before you begin, read these instructions completely and carefully.
Be certain electrical power is OFF before and during installation, maintenance and removal.
Fan wiring must be properly grounded in accordance with the NEC and any applicable local code requirements.
Use only UL or IEC approved wire for input/output connections.
Verify that supply voltage matches voltage on fan label. Installation to any other connection may void the warranty.
Wear gloves during installation to prevent injury and do not expose wiring to metal or sharp edges.
WARNING: To reduce the risk of fire, electrical shock, or personal injury, mount this fan to an outlet box marked "Acceptable for Fan Support of
22.7kg (50lbs)" or less and use Mounting Screws provided with the outlet box. CAUTION: Install the primary mounting means and use only the
hardware provided with the fan.
To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or clearing the fan. Be
careful not to insert foreign objects in between rotating fan blades.
To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur.
It must be understood that common sense, caution and careful attention to detail are factors which cannot be built into this product. These
ELECTRIC SHOCK
FALLING PARTS
factors must be supplied by the person or persons installing, caring for, and operating the unit.
This product should be installed, inspected and maintained by a qualified and licensed electrician. Installation of luminaire must be in accordance
with NEC and local code requirements.
ABRASIONS
BURNS
SAVE THESE INSTRUCTIONS
SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS.
Installation Manual
CIRRUS CEILING FAN
REV 2022 1018
PEACOCK FAN COMPANY • PEACOCKFAN.COM
1

Advertisement

loading

Summary of Contents for PEACOCK CIRRUS

  • Page 1 This product should be installed, inspected and maintained by a qualified and licensed electrician. Installation of luminaire must be in accordance with NEC and local code requirements. ABRASIONS BURNS SAVE THESE INSTRUCTIONS REV 2022 1018 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS. PEACOCK FAN COMPANY • PEACOCKFAN.COM...
  • Page 2: Tools Required

    Remote Control Bottom Cover Blade Fasteners Package Balance Package Blade Screws SAVE THESE INSTRUCTIONS REV 2022 1018 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS. PEACOCK FAN COMPANY • PEACOCKFAN.COM...
  • Page 3 2 screws. (See Figure 6) Downrod Bracket Slot Groove FIGURE 4 FIGURE 5 FIGURE 6 SAVE THESE INSTRUCTIONS REV 2022 1018 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS. PEACOCK FAN COMPANY • PEACOCKFAN.COM...
  • Page 4: Wiring Diagram

    A) Tighten the bottom cover in a clockwise direction. FIGURE 12 FIGURE 15 SAVE THESE INSTRUCTIONS REV 2022 1018 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS. PEACOCK FAN COMPANY • PEACOCKFAN.COM...
  • Page 5: Installation Height

    Don't add lubricating oil or lubricant to any part of this fan. SAVE THESE INSTRUCTIONS REV 2022 1018 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT PEACOCK FAN COMPANY FOR UP TO DATE DETAILS. PEACOCK FAN COMPANY • PEACOCKFAN.COM...