arianna Baby-Vac II Quick Start Manual

1

INTRODUCTION

Running nose is quite common with
babies and toddlers. One of the major
problems is that small children cannot
blow their noses, and it takes time till
a toddler or baby learns to breathe
through the mouth. A blocked nose
hinders breathing, can cause
discomfort and may lead to serious
health issues of the nose, ears, throat
and airways. That is why keeping the
nose clean is so important. Arianna
TM
Baby Vac Nasal Aspirator is the
best choice for this purpose. Of
course a medical checkup should not
be omitted, because only a doctor
can diagnose the cause. Removing
the mucus from the nasal passages
accelerates the healing process,
enhances breathing, the general
comfort and helps preventing
disease.
Applications: The device is made for
removing children's mucus. It cannot
be used for other purposes.

IMPORTANT:

First use:

Before first use rinse the device
thoroughly with hot drinking water.
Do not soak in detergent!

Cleaning:

Clean the device after each use.
Wash it in warm tap water possibly
immediately, with baby/child friendly
detergent. Rinse with hot or warm
water. Wipe the exterior of the
evacuator with soft cloth or with
cotton pads soaked with pharmacy
grade ethyl alcohol. Do not use any
other detergent, chemical or abrasive
material.
V01
Arianna Baby-Vac
In case of haemophilia or frequent
nose bleeding ask for medical advice.
If after use the child's nose shows
allergic rash or redness, stop using
the device. Ask for medical help.
When it is used for more than one
child, it is recommended to use
separate evacuators for each
children, and to store them signed. If
it is not possible, clean the head
thoroughly before each use as
®
described above.
 Use a vacuum cleaner with a power
range of 800-1800 W. (Safe use is
confirmed by test reports.) Consult the
user manual of the vacuum cleaner.
 The nasal aspirator-vacuum cleaner
is not a children's toy.
The device must be used by an adult
after reading the manual.
 Only use the device for the
designated area of application.
 Do not use the device if any of the
components are damaged or missing.
 Clean the end of the evacuator (A)
with soft cloth or with cotton pads
soaked with pharmacy grade ethyl
alcohol. Do not use other
chemicals.
Store the device in dry, cool
environment, protected from direct
sunlight and heat radiation.
1. Insert the evacuator (A) into the
collection cylinder (B).
2. Turn on the household vacuum
cleaner.
3. Connect the vacuum cleaner
connector (C) to the vacuum cleaner
hose.
®
CAUTION

WARNING

STORAGE:

SET-UP:

Model II. ENG