Download Print this page

Advertisement

Quick Links

UG-06
USER MANUAL
深圳市品存数码科技有限公司
LED Indicator Light Description
Blue and green LED twinkle alternately
Pairing Status
Blue LED stays on indefinitely
Power On
Blue LED flashes slowly when music playing, Blue
Wireless Mode
LED stays on indefinitely when paused
The blue led light of mic boom will stays on indefinitely
Incoming Call
after headphones power on, and the blue led light of
Status
mic boom will go off if you press mute button.
Orange LED stays on while in charging
Charging Status
Orange LED goes out while fully charged
Basic Key Operation
Turn On
Long press
for 3 seconds, the headphone will turn on after blue LED
stays on for 3 seconds.
Turn Off
Long press
for 3 seconds, the blue and green LED will stay on for 3
seconds, then go out.
Volume Adjustment
Turn the volume control knob to the
side to turn up the volume, turn it to the
side to turn down the volume.
Music Selection
Short press
or
to skip to the next song or previous song.
Play/Pause/Phone call
Music Pause: Short press
when in music playing.
Music Play: Short press
when in music pause.
Answer Calls: Short press
when a call coming in.
Hang Up: Short press
when on a call.
Refuse to Answer: Long press
when a call coming in.
When Wireless is connected, double press
will re-dial the last phone number
in your call record.
Headphone Turn On Status
Long press the On/Off button for 3 seconds, the headphone will turn on, and enter
pairing status or re-connect to the last connected Wireless device.
Wireless Connection
After the headphone turns on, the blue and green LED will twinkle alternately. Turn on the
Wireless in your cell phone and search for "UG-06", click to connect. The blue LED will
stay on indefinitely after connected successfully, and the blue LED will flash slowly when
music playing.
Mute the Boom Microphone
after power on the blue LED light on the mic boom will stay on indefinitely. Short
press the mic mute button to mute the microphone, and the headphone will
prompt "didi", and the blue LED light on the mic boom will go off. Short press the
mic mute button again to turn on the mic, it will prompt "di", and the mic blue LED
light will stay on indefinitely.
Language Switch
Turn on the headphone and don't connect it with any devices, long press M button for 3
seconds for switching language between Chinese and English.
Charging Mode
When in a low battery, please charge it for around 2 hours with USB-C charging
cable. The headphones will be turned off automatically while charging. Orange LED
stays on indefinitely while in charging, and orange LED goes out while fully charged.
Power Status
When the headphone is connected to the IOS device, the current power status of
the headphone will be showed on the upper right corner of the device screen. When
the battery is low, it will prompt "battery low".
Line-in Mode
*In the power-on state: plug in the audio cable, the headphone will automatically
turn off, and you can listen to music on the audio cable.
*In the power-off state: plug in the audio cable, you can only listen to the music o
the audio cable.
Note:
*If you want to use Wireless, you need to unplug the audio cable and turn the
headphone on.

Advertisement

loading
Need help?

Need help?

Do you have a question about the UG-06 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KOFIRE UG-06

  • Page 1 *In the power-off state: plug in the audio cable, you can only listen to the music o After the headphone turns on, the blue and green LED will twinkle alternately. Turn on the the audio cable. Wireless in your cell phone and search for "UG-06", click to connect. The blue LED will Turn Off Note: stay on indefinitely after connected successfully, and the blue LED will flash slowly when...
  • Page 2 LED light switch for 2 seconds to turn the LED light on. If you LED Indicator automatically install the driver, the name displayed on the device is: UG-06, and want to turn off the colorful LED light for saving battery or for other reasons, long- the default is device audio transmission, the transmitter enters the standby state press the decoration LED light switch for 2 seconds to turn the LED light off.
  • Page 3 Power Off / Reset Unplug the Wireless transmitter. Wireless Connection Long press the transmitter button for 3 seconds, the Wireless transmitter enters pairing status with the blue LED flashing quickly, now it supports listening to music, Wireless video playback, Wireless video calls, etc. Wireless Disconnection Short press the Wireless transmitter button, and the red LED will stay on indefinitely.
  • Page 4 Headphone Parameters Information Warm Tips Warning 1. Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may 1. If the battery is replaced improperly, there is a danger of explosion. It can only be Wireless Version damage the headphone.