Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
2015 by Harbor Freight Tools
©
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Specifications
Total Wt. Capacity
Weight
Material
Rails
To prevent serious injury and property damage:
2. Do not exceed 457 lb. weight capacity, evenly
distributed. Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
3. Load evenly from bottom up.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
. All rights reserved.
®
Drawer
457 lb.
A
101 lb.
B
Steel
Weight Capacity for Top Panel
Ball-Bearing
WARNING
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Number of
Size
Drawers
12" x 15-3/4" x
2-1/2"
12" x 15-3/4" x
5-3/4"
4. Do not open or leave open more
than one drawer at a time.
5. Do not stand or climb on Cabinet.
6. Wear ANSI-approved safety goggles
during assembly and setup.
7. Only lift with partner and only while empty.
If cabinet still too heavy, get further assistance.
Weight Capacity
(per drawer)
5
59 lb.
2
59 lb.
44 lb.
REV 15c
Need help?
Do you have a question about the PRO 62580 and is the answer not in the manual?
Questions and answers