Download Print this page

Advertisement

Quick Links

Aero Diffusion
F
Technical Specifications
TowerScent®

Advertisement

loading
Need help?

Need help?

Do you have a question about the TowerScent and is the answer not in the manual?

Questions and answers

Summary of Contents for SpringAir TowerScent

  • Page 1 Aero Diffusion Technical Specifications TowerScent®...
  • Page 2 Table of Contents Introduction II) Technology III) Programming IV) Towerscent Refill Duration p.9 V) Special Instructions for Use p.10 VI) Specifications p.11 Aero Diffusion Technical Specifications 2023...
  • Page 3 Introduction Aero Diffusion Technology® can be applied by 5 different devices that cover every need. The devices have been designed in order to respond to the demands of any project or area. They are fully programmed and ergonomical. Aero Diffusion Technical Specifications 2023...
  • Page 4 TowerScent® TowerScent® is a unique solution for distinctive installation on the area. It can be placed on the floor it’s fully programmed function to respond to every need. Towerscent can cover larger spaces with its ultra-silent technology. Product Catalogue_2023...
  • Page 5 Technology Aero Diffusion appliances of Spring Air thanks to the patented diffusion system that they use, they can ensure the conversion of the liquid fragrance into ultra fine droplets ,distributing them at an average of 1.000 nanometers (1 micrometer μm) in diameter. What can be characterized as being unique concerning the Aero Diffusion Technology®...
  • Page 6 Programming Installation 1. Insert the key to unlock the door. 2. Place the cartridge into the device. 3. Lock the door and access the power supply, then turn on the power switch, setting working time to start. Aero Diffusion Technical Specifications 2023...
  • Page 7 Programming Day & Time programming 1) Turn power on, the LCD displays the current hour, minutes and work day. It also shows the current working state as WORK ON, PAUSE ON or PAUSE OFF. 2) Press [SET], then press [UP] or [DOWN] to adjust the hour, minute or working days setting. 3) Press [MODE] to set device’s work period and WORK/PAUSE time.
  • Page 8 Programming 4) Please repeat the above steps to set 2 work periods 5) Reset the default setting by pressing [MODE] for 10 seconds. Default Setting: The ON time of 1 work period is 8:00, OFF time is 22:00. WORK time is 60 seconds, PAUSE time is 60 seconds. The 2 work periods stay in blank Aero Diffusion...
  • Page 9 TOWER SCENT REFILL DURATION Working Time in Sec Stoping Time in Sec Hours per Day Refil Duration Days Aero Diffusion Technical Specifications 2023...
  • Page 10 Special Instructions for Use 1) This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Page 11: Specifications

    Specifications IconoScent® Technical Characteristics Reference IconoScent® Diffuser Type Cold Evaporation Diffusion device Diameter of particles 300nm to 1μ micron Power Input Input 100 - 240 VAC at 0.6 A 0,14 A IN 100 V 0,074 A IN 240 V Frequency 50/60 Hz Protection Switching power supply...
  • Page 12 Revolutionary solutions different needs …...