RHA MA750 Wireless - Wireless Headphones User Guide

Enable Device Pairing

Please read this user guide to use your headphone to its full potential.

Turn on Bluetooth or NFC on your device.

Enable Pairing Mode

With headphone turned off, hold power button for 5 seconds.

Connect

For Bluetooth, follow device instructions. For NFC, place device against NFC logo on neckband briefly.

Power

Hold power button for 2 seconds to turn on.
To check battery level, tap the power button.

Charge

Using the supplied cable, plug headphones in to charge.

Remote

The 3-button universal remote and microphone enables full device, call and digital assistant control.

Fitting & Hooks

Hold the housings, place the ear hooks behind the ear, loop over and insert the tip into the ear. Once inserted, adjust the housings and ear hooks till secure.

Comply™ Ear Tips

1. Compress Comply™ foam tip by rolling with fingers.
   
   
2. Pull ear back, insert and hold for 15-30 sec.
   

Cleaning & Maintenance

Keep headphones safe in the supplied case.

Warranty

For information on claiming under warranty, visit www.rha.co.uk/warranty-tc