Advertisement
Table of Contents
Contents
HolyHigh ET6 Wireless Headphones Manual
Package Accessories
2*HolyHigh Earbuds
1*Charging Case
1*Type-C Charging Cable
1*User Manual
4*Pairs of Ear Tips
Product Introduction
- Multifunctional Button
- LED Indicator of Earbud
- Charging Pins on Earbud
- Type-C Charging Port
- LED Indicator of Charging Case
- Charging Pins on Charging Case
Usage Instructions
- After you open the package for the first time use, please tear off the insulation film on the earbuds, then charge the earbuds and charging case via charging cable for at least 10 minutes; do not take out the earbuds during this period.
![Usage Instructions - Charging]( "HolyHigh - ET6 - Usage Instructions - Charging")
- The earbuds are installed with a pair of medium-sized ear tips bydefault. Please select the suitable size for secure fit.
How to pair
- Binaural mode instructions:
Open the charging case and take out the earbuds or press and hold the Multifunctional Buttons (MFB) for 2 seconds in power-off state to turn them on, the left and right earbuds will enter TWS pairing mode automatically.
After the pairing is successful, the indicator of the main earbud will flash red and blue light alternately and the indicator of the secondary earbud will flash blue light every 3 seconds, and a voice prompt"Pairing"will follow from the main earbud. At this time, turn on the Bluetooth function of your phone, search"HolyHigh ET6"and click to pair. After the pairing is successful, the earbuds will prompt you with"Connected". When you take out the earbuds for use, the indicators of earbuds will go out. - Mono mode instructions:
Open the charging case and take out a single earbud or press and hold the MFB for 2 seconds in power-off state to turn it on. At this time, please double click the MFB on the earbud, then a voice prompt"Pairing"will follow and the indicator of the earbud will flash red and blue light alternately. Turn on the Bluetooth function of your phone, search "HolyHigh ET6" and click to pair. After the pairing is successful, the earbud will prompt you with"Connected".
Note:
If you are using one earbud in mono mode but you need to switch to binaural mode, and the charging case still has battery power, please open the charging case and take out the other earbud for use.
How to reset
- Delete the pairing name"HolyHigh ET6"on your mobile phone andturn off the Bluetooth function.
- Turn off the earbuds then press and hold the MFB for 7 seconds inpower-off state, release the MFB after the red and blue LED indicators rapidly flash three times at the same time, then let the earbuds stay still for 5 seconds.
- Put the earbuds back into the charging case and close the chargingcase.
- Take out the earbuds from the charging case and they enter pairingmode. That means the earbuds have been reset successfully. 5) If the reset fails, please repeat the above steps.
How to control
| Turn on | Open the charging case and take out earbuds/press and hold the MFB for 2s in power-off state |
| Turn off | Put back into the charging case/press andhold the MFB for 5s in non-playing state |
| Play | Double click the MFB on L/R earbud |
| Pause | Double click the MFB on L/R earbud |
| Previous song | Press and hold the MFB on L earbud for 2s (with a prompt tone) Note: In mono mode, long press the MFB on L earbud for 2s will skip to next song. |
| Next song | Press and hold the MFB on R earbud for 2s (with a prompt tone) |
| Volume down (in calling state) | Press and hold the MFB on L earbud for 2s(Volume can be turned down continuously if you keep the MFB pressed) Note: In mono mode, this function is unavailable. |
| Volume down(in music-playing state) | Click the MFB on L earbud to decrease the volume by one level. Note: Do not click too fast, otherwise the musicmay be paused due to misoperation. This function is unavailable in mono mode. |
| Volume up (in calling state) | Press and hold the MFB on R earbud for 2s (Volume can be turned up continuously if you keep the MFB pressed) Note: In mono mode, this function is unavailable. |
| Volume up(in music-playing state) | Click the MFB on R earbud to increase the volumeby one level. Note: Do not click too fast, otherwise the musicmay be paused due to misoperation. This function is unavailable in mono mode. |
| Answer a call | Double click the MFB on L/R earbud |
| Hang up a call | Double click the MFB on L/R earbud |
| Reject a call | Press and hold the MFB on L/R earbud for 2s |
| Activate voice assistant | Click the MFB on L/R earbud 3 times |
Product parameters
| Version | 5.0 |
| Support protocol | HFP, HSP, A2DP, AVRCP |
| Working distance | 10M (barrier-free) |
| Working time | Up to 6 hours (Varies by volumelevel and audio contents) |
| Single earbud/charging case battery capacity | 50mAh/600mAh |
| Charging times | Up to 5 times |
| Input current | 5V/1A |
| Charging time of earbuds | 1.5 hours |
| Charging time ofcharging case | 2 hours |
LED indicator
| Status | Description | Voice prompt |
| Turn on | Blue light for about 2s | "Power on" |
| Turn off | Red light for about 3s | "Power off" |
| Pairing | The main earbud flashes redand blue light alternatelyand the secondary earbud flashes blue light every 3s | "Pairing" |
| Successful connection | Indicators of both earbuds go out | "Connected" |
| Earbuds are being charged | Red breathing light | / |
| Earbuds are fully charged | The light of Indicators go out | / |
| Charging case is being charged | Flash white light | / |
| Charging case is fully charged | White light constantly on | / |
| When earbuds are being charged bythe charging case, the indicator of charging case | Flash white light | / |
FAQ
The charging case still has battery power, but why the earbuds can not be charged?
- For the first time use, please confirm that whether the insulation filmof the earbuds is removed or not.
- Please confirm that the earbuds are correctly placed in the chargingcase. Otherwise, the earbuds can not be charged if the charging pins of earbuds and charging case don't contact fully.
- Wipe the pins (golden part) of the earbuds and the charging case with a clean cotton cloth to ensure that there are no foreign objects.
Why is there a jamming when using the earbuds?
Due to the characteristics of Bluetooth earbuds, the electromagnetic wave interference in the area may cause temporary jamming.
Can the left and right earbuds be connected separately to twodifferent devices?
No.
AFTER-SALE SERVICE
Our customer service is friendly and hassle-free, please contact us if you need our help as following:
- Technical Support
- Package is Not in Perfect Condition.
- Orders beyond the deadline of the Amazon Return Window are also accepted.
Email: support@yogotec.com
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the ET6 and is the answer not in the manual?
Questions and answers