Korus M20 - Wireless Speaker Manual

Also See for M20:

Owner's manual (23 pages)

Table of Contents

Contents

1 Getting Started
- 1.1 Charge the Speaker
- 1.2 Power Up Your Speaker
2 Plug your Baton into Your Device
3 Pair with Bluetooth
4 Play Your Device
5 Listen and Enjoy
6 Register Your Product
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Korus M20 - Wireless Speaker Manual

Getting Started

Congratulations on purchasing your new Korus speaker! There are seven easy steps to complete to start enjoying your speaker.
Please also read the important Korus Safety Information, located in the Owner's Manual, before using this product.

Charge the Speaker

Unpack your Korus speaker and insert the USB cable into the micro USB port (1) located on top of the speaker.
Insert the other end of the USB cable into the USB power adapter (2), and then plug the USB power adapter into the wall (3) to charge the speaker's battery.

It is recommended to fully charge the battery before first time use. First time charging will take approximately 2-3 hours. The Power button light flashes white while charging and stops flashing once charging is complete.

Power Up Your Speaker

Press the Power button on the speaker. When you turn on the speaker, the Power button light turns white in color.

Plug your Baton into Your Device

(Included Batons vary by model)

warning
Note: For Bluetooth wireless, proceed to step 4.

If you are using a USB Baton, it requires no setup with most computers and newer operating systems.
If required, you can configure your USB Baton using the following steps:
For Windows^® Users – Open Control Panel > Hardware and Sound > Sound.
Under the Playback tab, select Speakers (SKAA Transmitter), and then select the Set Default button.
For Mac^® Users – From System
Preferences, select Sound. Under Output, select SKAA Transmitter.
After setting up your Baton, proceed to step 5.

If you are using a 30-pin Baton, you will automatically be taken to the App Store for the Korus volume control app. Download and open the Korus volume control app.
warning
Note: The Korus volume control app needs to be open (but can be minimized) when you are using the 30-pin connector Baton.
After setting up your Baton, proceed to step 5.

If you are using a Lightning^® Baton or the micro USB Baton, proceed to step 5.
You can use a Baton with up to four Korus speakers simultaneously. To purchase additional Batons, visit www.KorusSound.com.

Pair with Bluetooth

Press the Bluetooth button on the speaker.
Press and hold the Bluetooth button on the speaker for 2 seconds to initiate pairing. The Bluetooth light will be white and flashing.
Activate your Bluetooth device, and then search for the Korus M20 speaker.
Select the Korus M20 speaker from the list of found devices. The Bluetooth button light turns solid white when successfully paired.

Play Your Device

Begin playing the song, video, or game of your choice.

Listen and Enjoy

Your Korus speaker automatically connects and begins playing. If you are using additional Batons, see the Adding a New Baton to the Speaker's Favorites List section in the Owner's Manual for additional setup information.

Register Your Product

To enable your warranty and help us provide you great customer service, register your product at www.KorusSound.com/register.

Mac and Lightning are U.S. registered trademarks of Apple Inc. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark of Bluetooth SIG Inc., registered in the U. S. and other countries. Copyright ©2014 Core Brands, LLC. All rights reserved. The SKAA^™ word mark and trademark are owned by Eleven Engineering Inc. All other products and brand names are trademarks of their respective owners.