Nodis ND-SB01 - Mini Sound Box Manual

Product description

ND-SB01 is a multi-function Bluetooth speaker with high quality music performance and mini compact design. This mini speaker can allow you to stream music from Bluetooth-enabled mobile phones and laptops wirelessly. The 3.5mm universal audio jack interface on the speaker can also be used to play music without Bluetooth, such as an MP3, MP4 or CD player. When connected to a music player, it will bring you a great audio experience.

Product overview

1. Loudspeaker
2. Charging port
3. Led Indicator
4. Line in jack 3.5mm
5. ON/OFF/Bluetooth switch

What's in box:

• ND-SB01
• 3.5mm audio jack cable
• USB charging cable
• Carry pouch
• User manual
• Warranty card

Charging

ND-SB01 USES A DC3.5MM USB CHARGING SOCkET, AND COMES WITH A USB CHARGING CABLE.

1. Connect the USB lead to the port of the speaker and insert the other end in the port of your PC or other suitable USB outlet.
2. Afterwards, each charge cycle may take 1.5 hours.
3. LED will indicate red while charging and off when charging is complete.

Note:

1. Only use the Nodis certified charger, or consult Nodis support if you intend to use a third party charger.
2. When the battery is low, LED will flash red and beep sound will come out every 20 seconds. Please charge it.

Basic operations

USING 3.5MM AUDIO CABLE

1. Connect the 3.5mm audio cable from the speaker to your music player.
2. Switch the ON/OFF to ON position and the LED keeps blue when Line in is working.
3. Adjust the volume using the controls on your music player.
4. After use, switch off the speaker and disconnect the audio cable.

Using Bluetooth ®

1. Switch the ON/OFF/Bluetooth to the Bluetooth position - LED will flash blue quickly.
2. Turn on the Bluetooth of your mobile phone or music device, search for Bluetooth device.
3. Select "ND-SB01" in the list of Bluetooth devices, then follow the steps and enter pin code 0000 to pair.
4. Once paired and connected, LED will flash blue once every 15 seconds. The Bluetooth speaker will be automatically connected to your mobile phone or music device whenever you turn the Bluetooth speaker on again and the device is in the range.

NOTE:

1. When losing connection, the speaker will automatically switch itself off after 30minutes, please restart it again when connect.
2. When the battery is nearly running out, LED will not show up if you switch to Bluetooth side. But it may work fine on the Line in side. Please charge it.
3. Do not play music at excessive levels as damage to the equipment may result.
4. Do not use outdoors in the wet or in damp surroundings.

Product specification

Dimension: 45mm x 45mm × 55mm
Net weight: 81.5g
Bluetooth compliance: Bluetooth V2.1
Operating frequency band: 2.401-2.480 GHz (2.4GHz ISM segment)
Operation range: Class 2, up to 10 meters
Support profiles: A2DP, AVRCP
Speaker: 36mm (4Ω)
Loudspeaker output: 2.2W
Frequency response: 20Hz-20kHz
Signal-to-noise: 95 ± 2db
Distortion: 1%
Bluetooth playback time: up to 6 hours
Line-in playback time: up to 8 hours
Battery voltage/capacity: 400mAh
Battery charging voltage: 5V
Battery charge time: 1.5 hours

Troubleshooting

Safety information

• To avoid damage or malfunction of this device, do not drop it from high places.
• keep this device away form humidity, water and other liquids. If the device is exposed to water, moisture or other liquids, do not operate it to avoid the potential of electric shock, explosion or damage to the device / injury to yourself.
• Do not place or keep this device near any heat source, such as direct sunlight, radiators, stoves or other apparatus which produces heat. It may cause an explosion or degrade the performance and/or life of the battery.
• Do not attempt to modify, repair or disassemble this device yourself (Especially the battery: It may cause an explosion). Attempting any repair or modification of this device yourself will void the warranty.
• Do not place heavy objects on this device.
• Use only the correct charger as supplied with this device.
• Replacement or service must be done by a qualified service center or by the manufacturer.
• Unplug this device when unused for long periods, or during lightning storms.

Electric shock hazard
The battery in this device may present a risk of fire or chemical burning if mistreated.

Declaration of conformity

UE
This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC To request a copy of CE declaration contact: info@nodis.it

NODIS Srl V.le Fulvio Testi 126 20092 Cinisello Balsamo (MI)
Tel. +39.02.26227656. Fax +39.02.26269236 info@nodis.it