808 Audio EARCANZ FLY - Wireless Earbuds Quick Start Guide

Unpack

Make sure you have the following items in your 808 EarCanz Fly package:

If you have any questions about this product, visit 808Audio.com or call our toll-free help line at 1-800-732-6866.

Charge the EarCanz Fly

For best performance, we recommend you charge your EarCanz Fly earbuds fully before using them.

Open the DC IN flap on the side of the controls below the right earbud.
Plug the included USB charging adapter into the charging jack behind the DC IN flap.
Plug the other end of the adapter into a USB power source (like a computer or a USB charger).
The indicator light on the front of the controls turns red while the earbuds are charging. It turns blue when the earbuds are fully charged.

Turn on the EarCanz Fly

Unplug the USB charging adapter when the earbuds are charged.
To turn on the EarCanz Fly and start pairing to your Bluetooth device:
Press and hold the button on the controls for about 6 seconds (until the indicator on the controls starts blinking rapidly).
To turn on your EarCanz Fly regularly: Press and hold the button on the controls for 1–2 seconds. The indicator on the controls starts blinking slowly.
To turn the EarCanz Fly off: Press and hold the button on the controls for 3 seconds.

If you've previously paired your phone or other Bluetooth device with these earbuds, the earbuds will automatically attempt to reconnect to that device when you turn them on. If you want to pair to a new device, turn the earbuds off. Then press and hold the button on the controls for about 6 seconds (until the indicator on the controls starts blinking rapidly) to put the earbuds in pairing mode. Once the indicator on the controls starts blinking, go to step 3 to pair and connect.

The earbuds beep when the process is complete. The indicator on the controls turns solid blue.

Note: The process of enabling Bluetooth and connecting varies from device to device. See your device's owners manual for more information and specific instructions.

Bluetooth Wireless Connection Tips

To pair the EarCanz Fly again
After turning your earbuds back on, they automatically attempt to reconnect to the last connected device. If the last connected device is not available, the earbuds will enter pairing mode and be ready to pair to a new or different device.

Using the EarCanz Fly

Putting the EarCanz Fly in your ears
The EarCanz Fly earbuds come with medium-sized eartips and ear fins installed. You can use different-sized tips, but first try them with the medium size.

Find the L and R markings on the buds—place the cord behind your neck with the L bud on the left and R bud on the right.
Place each eartip in your ear as shown here. The fin should go in the small ridge just above your ear canal on your outer ear—it might go automatically, or you might need to move it into place.
If the tips don't fit (or you want to use the earbuds without fins), follow the directions in the next section to change them.

Changing the eartips

1. Remove the eartip from each earbud.
2. If you want to use the earbuds without fins, remove the ear fin from each earbud. Otherwise, keep them on.
3. Find the size of tips you want. Place each tip on each bud.

Listening to music

Set your device's volume for music to 50%.
Note: This is to make sure the sound from the earbuds isn't too loud when you start streaming.
Start playing music or other audio on your device. Within seconds, the earbuds start streaming the audio wirelessly via Bluetooth.

Controlling playback and volume

The control panel near the right earbud lets you control music playback and volume wirelessly.
To play/pause music: Press the button.
To adjust volume: Press the or button.
To go to the previous/next song: Press and hold the or button.

Answering/ending phone calls
The earbuds' control panel has a built-in microphone, so you can use the EarCanz Fly for phone calls. Your phone will ring through the earbuds when you're receiving a call. You can answer and end the call wirelessly from the control panel. To answer or end a phone call: Press the button.
To decline a phone call: Press and hold the button for 1 second.

Not all phones support playback control and phone answer/ end control. Check your phone's user manual for more information if you're having trouble with these functions.