Nyne Rebel - Portable Bluetooth Speaker Quick User Guide

Table of Contents

Contents

1 What's in the box
2 Charging
3 Power on
4 NFC
5 Play music
6 To stream music
7 Connection
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

What's in the box

Charging

Charge the speaker until all five charging indicators light up at once indicating the battery is fully charged.
Tip:You can press LEVEL to check the battery status. When most of the charging indicators are off, it indicates that the battery is low and needs to be recharged.

Power on

Press and hold until the speaker powers on.
The power button lights up white.
For first-time use, the Bluetooth indicator flashes blue quickly, indicating that the speaker is in pairing mode.
Tip:When you power on the speaker again after Bluetooth setup, the speaker will search for a previously paired device and the Bluetooth indicator will flash slowly. If no paired device is found, it will flash quickly and the speaker will enter pairing mode.

NFC

Make sure that the speaker is in pairing mode.
Enable Bluetooth on your device to be paired with the speaker.
1. Enable NFC on your Bluetooth device, and then touch the NFC transmitter on your device with the NFC area of the speaker.
2. Select 'NYNE Rebel' from the available devices (if necessary, enter the password such as '0000' or '1234') to start pairing and connection with the speaker.
After successful connection, the Bluetooth indicator turns solid blue and the speaker beeps.

Tips:This speaker supports automatic connection with a previously paired device after power-off and power-on again. You can press and hold for more than 2 seconds to enter manual pairing mode. In this way, you can pair the speaker with a new Bluetooth device. You can press and hold for more than 10 seconds to clear all paired Bluetooth devices. This speaker is compatible with the voice assistant on your smart device.

Charge your mobile device through the 5V 1A USB charging socket.

Play music

Play music on your device paired and connected with the speaker.
Note:This speaker supports automatic connection with a previously paired device after power-off and power-on again.

During music play:

Press +/-to adjust volume.
Press to skip to the previous or next song.
Press to pause or resume music play.

When you make a call or there is an incoming call, you can use the speaker as a speaker phone.

When there is an incoming call, you can press to receive the call or press twice to reject the call.
During a call, you can press to end the call.
In BT mode, you can press twice to access the voice assistant on your smart device. To exit the voice assistant, press twice again.

Tip: Music play is paused during a call and resumed automatically when the call ends. You can press and hold to disconnect the current Bluetooth connection.

To stream music

To stream music to multiple speakers at one time, connect the LINE-OUT socket on your NYNE Rebel to the AUX-IN socket on any other speaker via the supplied 3.5mm cable.

Connection

Connect an auxiliary MP3 device to the speaker through the supplied 3.5mm audio cable.
Play and control music on the MP3 device, and use +/-on the speaker to adjust volume if necessary.

Tips:In AUX IN mode, you can press to mute sound output from the speaker. When the 3.5mm audio cable is plugged in, the speaker switches to AUX IN mode automatically. When it is unplugged, the speaker switches back to Bluetooth mode.