Summary of Contents for Kofloc PSK-FB Series
- Page 1 MJ400181C1 POWER SUPPLY UNIT PSK-FB SERIES MASS FLOW METER / MASS FLOW CONTROLLER INSTRUCTION MANUAL...
- Page 2 MJ400181C1 We would ask you to surely read this instruction manual fully before installation and application of the product so as to maintain the performance and safety thereof. This enables preventing accidents and breakages of the product due to an erroneous application method. If the product has a malfunction or its readjust is required, please notify our agent near to you of your requirements.
- Page 3 MJ400181C1 PICTURE CAUTIOUS INDICATIONS FOR《PREAPPLICATION》OR 《SAFE APPLICATION》 The following are picture indications for cautions to be noted-observed before application or for safe application of the product. They have been illustrated in the instruction manual and on the specific portions of the product so as to ensure correct application of the product and prevent injuries to you or other workers, or damages to the properties.
-
Page 4: Table Of Contents
MJ400181C1 Table of Contents 1. Introduction 1-1 Introduction 1-2 Specifications 1) Power Speciflcations 2) Connector pin arrangement 2. Installation 2-1 In the case of rece1vrng the product 2-2 Installation 2-3 Mounting 3. Wiring connection 3-1 Wiring connections to the mas flow controller and mass flow meter (MFM) 3-2 Wiring connections to the external appliances 4. -
Page 5: Introduction
1. Introduction 1-1. Introduction The PSK-FB series power supply unit was developed for incorporation of the customer`s device or machine. It is designed in compactness for making easier the power supply to the mass flow meters / mass flow controllers manufactured by KOFLOC Corp. and for easier providing of INPUT/OUTPUT signals to external appliances. - Page 6 MFC flaw setting signal MF flow signal COM MFC flow setting signal COM Valve monitor (Option) Frame gland Shell (b) PSK-FB series --External appliances(D- sub 15 pin female) SPECIFICATIONS SPECIFICATIONS PIN NO. PIN NO. MFC valve open/close input MF output signal 0~5VDC...
-
Page 7: Installation
MJ400181C1 CAUTIONS: ・APPLICATION OF THIS APPLIANCE AT THE STATUS EXCEEDING THE SPECIFICATIONS CAUSES A MALFUNCTION THEREOF. IF NOT AVOIDED, A CRITIAL FAULT OR ACCIDENT OF THE MOUNTED DEVICE OR MACHINE MAY OCCUR. 2. Installation 2-1.In the case of receiving the product; When receiving this product, fully observe the appearance and check to ensure that no damages or breakages exist. -
Page 8: Mounting
MJ400181C1 2-3. Mounting Securely mount this power unit on the mounting plate with reference to the outside drawing in Fig. l. Form mounting, apply M3 small screws and consider the thickness of the mounting plate to have a distance within 3mm to the main machine. 3. -
Page 9: Malfunction
MJ400181C1 WARNING: ・ APPLY PRIVATE-PURPOSE CABLES, OTHERWISF, A BREAK MAY OCCUR. △ CONNECTION WITH IMPROPER CABLES MAY DAMAGE POWER UNIT, AND MFC / MFM. PIN ARRANGEMENT OF D-SUB 9P CONNECTOR OF OUR PRODUCT MODEL 3400 AND 3660 SERIES (MFC) IS IN CON- FORMITY WITH THE SEMI-STANDAF.DS. -
Page 10: Warranty
MJ400181C1 4.2 Warranty If a malfunction of the product occurs obviously due to our fault in design, manufacturing or packing within one (1) year after delivery out of the factory, this product can be replaced or repaired without any charges only in the limited range. However, if the malfunction occurs due to customer`s in adequate handling, the replacement or repairing will be charged to the customer. - Page 11 MJ400181C1 Outline drawing of the PSK-1FB...
- Page 12 MJ400181C1 Outline drawing of the PSK-...
- Page 13 MJ400181C1 Outline drawing of the PSK-6FB...
- Page 14 MJ400181C1 URL：http://www.kofloc.co.jp...
Need help?
Do you have a question about the PSK-FB Series and is the answer not in the manual?
Questions and answers